Convert priorities of MP2 work orders.
Select how to convert MP2 work order priorities. The conversion will only affect the work order priorities of the converted tasks. In HxGN EAM, the work order priority field is a field in which users select from a valid priority.
The grid displays the number of work order priorities that exist in HxGN EAM. Once the work order priorities are displayed in the grid, the MP2 range of priorities can be set up in order to convert them into the proper HxGN EAM priority.
MP2 priorities cannot overlap or users will receive an error. The system does allow gaps in numbering or a blank row in the grid. The priority field is not required in HxGN EAM; therefore, MP2 work order priorities are not required to be mapped.
Here is an example of six work order priorities in HxGN EAM:
Source Low Value |
Source High Value |
Destination Priority |
Description |
---|---|---|---|
1.00 |
1.99 |
1 |
Affects health and safety |
2.00 |
2.99 |
2 |
Affects output immediately |
3.00 |
3.99 |
3 |
Affects output within 24 hours |
4.00 |
4.99 |
4 |
Does not affect output immediately; spare exists |
5.00 |
5.99 |
5 |
Does not affect process/effect is minor |
6.00 |
9999.99 |
6 |
Non-vital equipment |
If you follow this example, no work order priority in MP2 will be excluded in the conversion process. No MP2 work order priority can be less than 1.00, and by setting the source high value to 9999.99 on the last number, the conversion process will convert any work order priority greater than 6.00, and will fall into the 6 work order priority in HxGN EAM.