Set OS 41 = 0 for mixed units.
Set OS 41 = 1 for imperial units.
Set OS 41 = 2 for metric units.
Set OS 41 Pos 2 = 1 for metric coordinates output in M.mmm format.
-
Set OS 41 Pos 3 for feet and inch output format, including stacked fractions.
-
Stacked fractions only apply to Imperial dimensions and currently only operate on MicroStation DGN drawings using a special font.
Set OS 41 Pos 4 = 1 for weights output in KGS format. Set OS 41 Pos 5 = 1 for component weights listed as total weights.
Set OS 41 Pos 4 = 1 for weights output in KGS format. Set OS 41 Pos 5 = 2 for component weights listed as individual weights.
This option switch controls the output of basic component weights. More extensive
weight functionality, including pipe fill, weights of insulation, and center of gravity
calculations, are controlled by Option Switch 82: Center of Gravity/Weight Output.
Set OS 41 Pos 6 & 7 = 0 or leave blank for imperial dimensions output format. Dimension output format changes from inches to feet at 24-inches. For example, 28" is output as 2' 4". This is the default setting
Set OS 41 Pos 6 & 7 = 12 for imperial dimension output format to change from inches to feet and inches at 12-inches.
Set OS 41 Pos 8 = 0 or blank for plotted bore information at branches and reducers.
Set OS 41 Pos 8 = 1 for bore information not plotted at branches and reducers.
