Controls the selective suppression from the isometric drawing of the coordinate information that is associated with each of the seven pipeline end connection/termination identifiers in -30 and -36 type records, and at any break-in point (BIP) identifier position in -47 type records. Each type is controlled by a separate position in the option switch as indicated by the layout graphic in the Switch Settings section. A separate switch setting is available to control the output of coordinate data at jacket/core connections.
The table below lists the coordinate identifiers:
|
Purpose |
ISO Text |
IDF Record Number |
|---|---|---|
|
Continuation on another pipeline |
CONT. ON |
-30 |
|
Connected to equipment nozzle |
CONN. TO |
-31 |
|
Identify any open end of pipe work |
User-defined text |
-32 |
|
Identify any closed end of pipe work |
User-defined text |
-33 |
|
Identify a vent position |
VENT |
-34 |
|
Identify a drain position |
DRAIN |
-35 |
|
Identify any miscellaneous position |
User-defined text |
-36 |
|
Identify a break-in point |
-- |
-47 |
Switch Settings
The following settings are available for Option Switch 5:
Switch Positions 1 through 8
|
0 |
Display ISO text (as shown in the previous table) and associated coordinate information on the isometric drawing. |
|
1 |
Suppress the display of ISO text and associated coordinate information on the isometrics drawing. |
Switch Position 9 - Coordinate Data Output at Jacket/Core Connections
|
0 |
Output jacketed connection coordinate data. |
|
1 |
Suppress output of jacketed connection coordinate data. |
Switch Layout
|
Related Program Development Specifications |
Version |
Date |
|
Dev. No. 29 - End Coords Suppression |
5.4.0 |
APR 1987 |
|
Dev. No. 47 - Ghost Gap Facility |
5.9.0 |
MAR 1990 |
|
Dev. No. 114 - Jacket and Core Pipelines |
11.2.0 |
DEC 2012 |
|
Related Option Switches |
||
|
N/A |
||
|
Option Switch Detail Sketch |
||