Controls the date format that is output on the isometric drawing and printed listings in a 2- or 4-digit year format. By default, the actual date that the software outputs is taken from either the PDF (pipeline data file) that is created by the host 3D design software or the computer system at the time the drawing is generated.
There are three format options plus an option switch setting to suppress any date output, even though a date exists in the IDF.
Switch Settings
The following settings are available for Option Switch 6:
SWITCH POSITIONS 1 and 2 - Date Output and Format
0 |
Output the date using British format (14 APR 09). This is the default setting. |
1 |
Output the date using European format (14/04/09). |
2 |
Output the date using American format (04/14/09). |
3 |
Suppress the output of a plotted date. |
10 |
Output the system date in British format. |
11 |
Output the system date in European format. |
12 |
Output the system date in American format. |
SWITCH POSITION 3 - Two- or Four-Digit Year Output
0 |
Output the year using a two-digit format. You can also leave the setting blank to generate the same output. |
1 |
Output the year using a four-digit format. |
Switch Layout
Related Program Development Specifications |
Version |
Date |
Introduced |
1.0 |
APR 1983 |
7.0 Release Notes |
7.1 |
JUN 1994 |
Dev. No. 74B - Four Digit Year |
7.16.0 |
MAY 1999 |
Related Option Switches |
||
N/A |
||
Option Switch Detail Sketch |
||