Set OS 53 = 1 for small-sized weld numbers.
Set OS 53 = 2 for medium-sized weld numbers.
Set OS 53 = 3 for large-sized weld numbers.
Set OS 53 = 6 for medium-sized fabrication welds.
Set OS 53 = 8 for medium-sized erection welds.
Set OS 53 Pos 2 = 1 for user-defined weld summary box. You must also use a Weld Definition File (WDF) for this box to work correctly. For details on the WDF, see the separate welding switches.
There is an alternative weld summary box that does not require a WDF, but it is not
user-defined. It uses a fixed layout and the content cannot be changed. Setting OS 53 Position 2 = 1 uses the alternative weld summary box.
Set OS 53 Pos 5 = Blank to use the same weld numbering sequence between fabrication and erection welds.
Set OS 53 Pos 5 = 1 to use separate weld numbering sequences between fabrication and erection welds.
Individual enclosures and weld number prefixes are recommended in this case.
