Controls the output combinations that are available for plotting the N/S and E/W coordinates and elevations at bend and tee intersection points and at isometric split points. This option switch also controls the output of coordinates and elevations along witness lines instead of the usual arrowed-out message lines. You can output coordinates at reference items and at pipe supports and location points. You can also output world coordinates information or relative coordinates information from the nearest reference plane.
Switch Settings
The following settings are available for Option Switch 66:
SWITCH POSITION 1 - Coordinates and Elevations Output as Arrowed-Out Messages or on Witness Lines at Bend and Tee intersection Points
|
0 |
Output coordinate and elevation data as arrowed-out message type. This is the default setting. |
|
1 |
Output coordinate and elevation data along witness lines. |
SWITCH POSITION 2 - Coordinates and Elevations Output at Bends and Elbows
|
0 |
Output elevation data only when changed. This is the default setting. |
|
1 |
Suppress output of elevation and coordinate data. |
|
2 |
Output elevation and coordinate data that have changed. |
|
3 |
Output a full set of coordinate data. |
SWITCH POSITION 3 - Coordinate & Elevation Output at Branch Intersection Points
|
0 |
Output elevation data only when changed. This is the default setting. |
|
1 |
Suppress output of elevation and coordinate data. |
|
2 |
Output elevation and coordinate data that have changed. |
|
3 |
Output a full set of coordinate data. |
SWITCH POSITION 4 - - Coordinate Output at Isometric Split Points
|
0 |
Suppress output of coordinate data. Message points to end of continuation components. |
|
1 |
Output full set of coordinate data. Message points to drawing split points. |
|
2 |
Suppress output of coordinate data. Message points to drawing split points. |
SWITCH POSITION 5 - Coordinate Output at Reference Items
|
0 |
Suppress output of coordinate data at reference items. |
|
1 |
Output coordinate data at reference items. |
SWITCH POSITION 6 - Coordinate Output at Pipe Supports
|
0 |
Suppress output of coordinate data at pipe supports. |
|
1 |
Output coordinate data only at Fabrication pipe supports. |
|
2 |
Output coordinate data only at Erection pipe supports. |
|
3 |
Output coordinate data only at Offshore pipe supports. |
|
4 |
Output coordinate data at all pipe supports. |
SWITCH POSITION 7 - Coordinate Output at Location Points
|
0 |
Suppress output of coordinate data at location points. |
|
1 |
Output world coordinate information at location points. |
|
2 |
Output relative coordinate data from nearest reference plane at location points. |
SWITCH POSITION 8 - Coordinate Output on Isometric Drawing
|
0 |
Suppress output of coordinate data on tracing controllers. |
|
1 |
Output relative coordinate data from nearest reference plane. |
SWITCH POSITION 9 - Coordinate Output on Tracing Controllers
|
0 |
Output world coordinate data. |
|
1 |
Output coordinate data at tracing controllers from nearest reference plane. |
Switch Layout
|
Related Program Development Specifications |
Version |
Date |
|
Introduced |
1.0.0 |
APR 1983 |
|
Dev. No. 59 - Dimensioning and Coordinate Upgrade |
7.0.0 |
OCT 1993 |
|
Dev. No. 83D - Reference Items: Coordinates, Thickness, & Layer Dev. No. 83E - Pipe Supports: Coordinates |
8.3.0 |
JUL 2000 |
|
Dev. No. 91L - Heat Tracing 8.13.0 Release Notes |
8.13.0 |
SEP 2006 |
|
Related Option Switches |
||
|
N/A |
||
|
Option Switch Detail Sketch |
||