The assemblies in the SDB package use the following general attributes:
|
Attribute Name |
Description |
Implementation Details |
|---|---|---|
|
IJUAhsSupportNumber:: |
Specifies the support detail number as defined in the support specification. The default BOM function uses this value to generate the BOM description for the support. |
For example, ABS-01, SH-02, and so on. |
|
IJUAhsSupportOrient:: |
Specifies how the support must be oriented with respect to the supporting object. |
The following codelist values from hsSupPipeOrientation of HS_S3DAssy_Codelist workbook are acceptable: 1 - Slope - Support orientates directly with the supporting object. Direct orientation to planar object
2 - Orthogonal - Support orientates orthogonally with global Z-axis. Orthogonal orientation to planar object
|
|
IJUAhsIncElevCO:: |
Specifies whether to include the elevation callout in the support. The callout for the elevation is on a label on the fabrication drawing. |
True - include callout False - exclude callout |
|
IJUAHgrDrawingTemplate:: |
Specifies the drawing template to use for the support. |
|
|
IJUAHgrRulePriority:: |
Sorts the supports returned by the Assembly Selection Rule shown in the Type list. |
|
|
IJUAhsValidation:: |
Specifies the hgrSupportRule that validates the state of the support and raises any custom warnings or errors to the user. You can customize the validation rules based on the support. The default ShoeValidationRule provides an example to check the insulation thickness and Limit Stop gaps. If you do not require any validation rule, do not enter any property. |
Frame Notes Attributes
The assemblies in the SDB package use the following general attributes:
|
Attribute Name |
Description |
Implementation Details |
|---|---|---|
|
IJUAhsPipe1XOff::Pipe1XOff |
Specifies the Pipe1 control point XOffset. |
|
|
IJUAhsPipe1YOff::Pipe1YOff |
Specifies the Pipe1 control point YOffset. |
|
|
IJUAhsPipe1ZOff::Pipe1ZOff |
Specifies the Pipe1 control point ZOffset. |
|
|
IJUAhsPipe2XOff::Pipe2XOff |
Specifies the Pipe2 control point XOffset. |
|
|
IJUAhsPipe2YOff::Pipe2YOff |
Specifies the Pipe2 control point YOffset. |
|
|
IJUAhsPipe2ZOff::Pipe2ZOff |
Specifies the Pipe2 control point ZOffset. |
|
|
IJUAhsElevationXOff::ElevationXOff |
Specifies the Elevation control point XOffset. |
|
|
IJUAhsElevationYOff::ElevationYOff |
Specifies the Elevation control point YOffset. |
|
|
IJUAhsElevationZOff::ElevationZOff |
Specifies the Elevation control point ZOffset. |
|
|
IJUAhsSpanStartXOff::SpanStartXOff |
Specifies the SpanStart control point XOffset. |
|
|
IJUAhsSpanStartYOff::SpanStartYOff |
Specifies the SpanStart control point YOffset. |
|
|
IJUAhsSpanStartZOff::SpanStartZOff |
Specifies the SpanStart control point ZOffset. |
|
|
IJUAhsSpanEndXOff::SpanEndXOff |
Specifies the SpanEnd control point XOffset. |
|
|
IJUAhsSpanEndYOff::SpanEndYOff |
Specifies the SpanEnd control point YOffset. |
|
|
IJUAhsSpanEndZOff::SpanEndZOff |
Specifies the SpanEnd control point ZOffset. |
|
|
IJUAhsLength1EndXOff::Len1EndXOff |
Specifies the Length1 control point XOffset. |
|
|
IJUAhsLength1EndYOff::Len1EndYOff |
Specifies the Length1 control point YOffset. |
|
|
IJUAhsLength1EndZOff::Len1EndZOff |
Specifies the Length1 control point ZOffset. |
|
|
IJUAhsLength2EndXOff::Len2EndXOff |
Specifies the Length2 control point XOffset. |
|
|
IJUAhsLength2EndYOff::Len2EndYOff |
Specifies the Length2 control point YOffset. |
|
|
IJUAhsLength2EndZOff::Len2EndZOff |
Specifies the Length2 control point ZOffset. |
|
|
IJUAhsDim1XOff::Dim1XOff |
Specifies the Dim1 control point XOffset. |
|
|
IJUAhsDim1YOff::Dim1YOff |
Specifies the Dim1 control point YOffset. |
|
|
IJUAhsDim1ZOff::Dim1ZOff |
Specifies the Dim1 control point ZOffset. |
|
|
IJUAhsDim2XOff::Dim2XOff |
Specifies the Dim2 control point XOffset. |
|
|
IJUAhsDim2YOff::Dim2YOff |
Specifies the Dim2 control point YOffset. |
|
|
IJUAhsDim2ZOff::Dim2ZOff |
Specifies the Dim2 control point ZOffset. |
|
|
IJUAhsBraceStartXOff::BraceStartXOff |
Specifies the BraceStart control point XOffset. |
|
|
IJUAhsBraceStartYOff::BraceStartYOff |
Specifies the BraceStart control point YOffset. |
|
|
IJUAhsBraceStartZOff::BraceStartZOff |
Specifies the BraceStart control point ZOffset. |
|
|
IJUAhsBraceEndXOff::BraceEndXOff |
Specifies the BraceEnd control point XOffset. |
|
|
IJUAhsBraceEndYOff::BraceEndYOff |
Specifies the BraceEnd control point YOffset. |
|
|
IJUAhsBraceEndZOff::BraceEndZOff |
Specifies the BraceEnd control point ZOffset. |
MultiLocate Attributes
|
IJUAhsMulti1::Multi1Qty |
Specifies the quantity of BeamClamps. |
Valid Multi1Qty, Multi1LocateBy, Multi1Location cases:
|
|
IJUAhsMulti1::Multi1LocateBy |
Specifies the location of BeamClamps. Each BeamClamp can be located in two ways:
|
|
|
IJUAhsMulti1::Multi1Location |
Specifies the spacing of the location based on the LocateBy attribute. |
