Attribute Name |
Description |
Implementation Details |
---|---|---|
IJUAhsBasePlate1:: |
Specifies the part number or the part class of the Base Plate on leg1. |
Base plate are optional parts. To exclude a base plate, do not enter any values for these attributes. |
IJUAhsBasePlate1Rl::BasePlate1Rule |
Defines an HgrSupportRule that returns a part number or part class to use for the base plate. The hanger rule must exist in the catalog; it can be a rule name or a ProgID. To select the part directly using BasePlate1Part, do not type any value for this property. |
|
IJUAhsBasePlate1Ang:: |
Specifies the angle of rotation for the BasePlate1Part about the Z-axis of the port to which the plate is attached. |
|
IJUAhsBasePlate1Off:: |
Specifies the distance by which the base plate must be offset from leg1. BasePlate1Offset applies only when the StructureConnection is set either to Lapped or Lapped-Opposite. |
|
IJUAhsBasePlate1OffDef::BasePlate1OffsetDef |
Defines how BasePlate1Offset is measured. BasePlate1OffsetDef specifies the distance between the base plate and leg1. |
|
IJUAhsBolt1::Bolt1Part |
Specifies the part number or the part class of the bolts connected to BasePlate1. |
Pipe attachment is an optional part.To exclude a pipe attachment, do not enter any value for these attributes. |
IJUAhsBolt1Rl::Bolt1Rule |
Defines an HgrSupportRule that returns a part number or the part class to use for the Bolts. The hanger rule must exist in the catalog; it can be a rule name or a ProgID. To specify the part directly using Bolt1Part, do not type any value for this property. |
|
IJUAhsBolt1Qty:: |
Specifies the number of bolts to include on BasePlate1. |
|
IJUAhsBolt1Offset1::Bolt1Offset1 |
Specifies the offset of the bolts from the center of plate. |
|
IJUAhsFrGrout::GroutPart |
Specifies the part number or the part class of the Grout1 on leg1. |
|
IJUAhsFrGroutRl::GroutRule |
Defines an HgrSupportRule that returns a part number or part class to use for the grout. The hanger rule must exist in the catalog; it can be a rule name or a ProgID. To select the part directly using GroutPart1, do not type any value for this property. |
|
IJUAhsFrGroutTh::GroutThickness |
Specifies the thickness of the grout plate thickness value. |
|
IJUAhsFrGrout2::Grout2Part |
Specifies the part number or the part class of the Grout2 on leg2. |
|
IJUAhsFrGrout2Rl::Grout2Rule |
Defines an HgrSupportRule that returns a part number or part class to use for the grout. The hanger rule must exist in the catalog; it can be a rule name or a ProgID. To select the part directly using GroutPart2, do not type any value for this property. |
|
IJUAhsFrGrout2Th::Grout2Thickness |
Specifies the thickness of the grout plate thickness value. |
|
IJUAhsStiffener::StiffenerPart |
Specifies the part number or the part class of the Stiffener Part. |
|
IJUAhsStiffenerRl::StiffenerRule |
Defines an HgrSupportRule that returns a part number or part class to use for the stiffener. The hanger rule must exist in the catalog; it can be a rule name or a ProgID. To select the part directly using StiffenerPart, do not type any value for this property. |
BasePlate2 and Bolt2 Attributes
BasePlate2 attributes display similar behavior as that of BasePlate1 attributes.