Nut Configuration Attributes - Intergraph Smart Reference Data Standard Database - Version 12.3 - Help - Hexagon PPM

SDB for SRD Hangers and Supports Help 12.3

Language
English
Product
Intergraph Smart Reference Data Standard Database
Search by Category
Help
Smart 3D Version
13
Standard Database for Smart Reference Data Version
12.3

The following attributes specify the Nut configuration attributes of an Adjustable Base Support:

Name

User Name

Category

On Property Page

Read Only

NutTopQty

Nut - Top Quantity

Standard

No

Yes

NutBotQty

Nut - Bottom Quantity

Standard

No

Yes

Attribute Name

Description

Implementation Details

IJUAhs_ABSNutSpacingDef::NutSpacingDefinition

Specifies how the Nut Spacing offset must be measured.

Use the following values:

1 - Nut Spacing uses the thickness of the Upper Plate

(Ignores all the Nut Spacing values that you type)

Illustration of Nut Spacing Definition - Value 1

2 - Top of lower Nut to bottom of upper Nut

Illustration of Nut Spacing Definition - Value 2

IJUAhs_ABSNutTopQty::NutTopQty

Specifies the number of top nuts to include.

The software uses quantity only if the upper Nut part is present.

IJUAhs_ABSNutBotQty::
NutBotQty

Specifies the number of bottom nuts to include.

The software uses quantity only if the Nut part is present.

When you define Nut parts, one part is added for each bolt. The Nut parts are positioned based on the PlateSpacing attribute. You must define the PlateSpacing attribute even if the Upper Plate part is not defined.

For more information about how to use the dimensional attributes, see Input Values.

Illustration of Nut Spacing Definition