The following attributes define the Cradle Shoe data driven assembly:
Attribute Name |
Description |
Implementation Details |
---|---|---|
IJUAhsPlate1:: Plate1Part |
Specifies the plate Smartparts part number or a part class that is used for the support. |
Option 1 - Specify a part number or part class directly. Option 2 - Use HgrRule to get the part. Plate1Part is mandatory. You must specify either a Plate1Part or Plate1Rule. |
IJUAhsPlate1:: Plate1Rule |
Specifies the hgrSupportRule that returns the part number for a hanger beam pipe. The hanger rule must be the name of an existing rule in the catalog. |
|
IJUAhsBasePlateThick:: BasePlateThick |
Specifies the base plate thickness. |
Option 1 - Specify a base plate thickness directly. Option 2 - Use HgrRule to get the part. |
IJUAhsBasePlateThickRl:: BasePlateThickRl |
Specifies the hgrSupportRule that returns the thickness of baseplate. The Hanger Rule must exist in the catalog and must be a rule Name. |
|
IJUAhsVertPlateThick:: VertPlateThick |
Specifies the vertical plate thickness. |
Option 1 - Specify a vertical plate thickness directly. Option 2 - Use HgrRule to get the part. |
IJUAhsVertPlateThickRl:: VertPlateThickRl |
Specifies the hgrSupportRule that returns the thickness of vertical plate. The hanger rule must be the name of an existing rule in the catalog. |
|
IJUAhs_VerQty::VerQty |
Specifies the quantity of vertical plates. (Max value is 2) |
Refer to MultiLocate attributes in Common section for Multi1Qty, Multi1LocateBy and Multi1Location information. |
IJUAhs_VerQtyRl::VerQtyRule |
A hgrSupportRule that returns the quantity of vertical plates. The Hanger Rule must exist in the catalog and must be a rule Name. |
|
IJUAhs_VerQtyLocateBy:: VerQtyLocateBy |
Specifies the location of vertical plates. Each vertical plate can be located in two ways: 1 - Relative to center of the group 2 – Relative to Edge. |
|
IJUAhs_VerQtyLocation:: VerQtyLocation |
Specifies the spacing of the location based on the LocateBy attribute. |
|
IJUAhsVertPlInset:: VertPlateInset |
Specifies the distance by which the vertical plate must get trimmed from edges of base plate. For a given value the vertical plate will be trimmed on both sides. |
|
IJUAhsRibPlateThick:: RibPlateThick |
Specifies the thickness of the rib plate |
|
IJUAhsRibPlateThickRl:: RibPlateThickRl |
A hgrSupportRule that returns the rib plate thickness. The Hanger Rule must exist in the catalog and must be a rule Name. |
|
IJUAhs_RibQty::RibQty |
Specifies the quantity of rib plates. |
Refer to MultiLocate attributes in Common section for Multi1Qty, Multi1LocateBy and Multi1Location information. |
IJUAhs_RibQtyRl::RibQtyRule |
A hgrSupportRule that returns the quantity of rib plates. The Hanger Rule must exist in the catalog and must be a rule Name. |
|
IJUAhs_RibQtyLocateBy:: RibQtyLocateBy |
Specifies the location of rib plates. Each rib plate can be located in two ways: 1 - Relative to center of the group 2 – Relative to Edge. |
|
IJUAhs_RibQtyLocation:: RibQtyLocation |
Specifies the spacing of the location based on the LocateBy attribute. |
|
IJUAhsStiffPlateThick:: StiffPlateThick |
Specifies the thickness of the stiffener plate |
|
IJUAhsStiffPlateThickRl:: StiffPlateThickRl |
A hgrSupportRule that returns the stiffener plate thickness. The Hanger Rule must exist in the catalog and must be a rule Name. |
|
IJUAhs_StiffQty::StiffQty |
Specifies the quantity of stiffener plates. |
Refer to MultiLocate attributes in Common section for Multi1Qty, Multi1LocateBy and Multi1Location information. |
IJUAhs_StiffQtyRl::StiffQtyRule |
A hgrSupportRule that returns the quantity of stiffener plates. The Hanger Rule must exist in the catalog and must be a rule Name. |
|
IJUAhs_StiffQtyLocateBy:: StiffQtyLocateBy |
Specifies the location of stiffener plates. Each stiffener plate can be located in two ways: 1 - Relative to center of the group 2 – Relative to Edge. |
|
IJUAhs_StiffQtyLocation:: StiffQtyLocation |
Specifies the spacing of the location based on the LocateBy attribute. |
|
IJUAhsCurvStiffener:: CurveStiffener |
Specifies whether the stiffener plate is curved or not. |
Use the following values: 1-True 0-False |