The Base Support uses the following attributes only when an Anchor Bolt part is specified:
Attribute Name |
Description |
Implementation Details |
---|---|---|
IJUAhsAnchorBoltX:: |
Specifies the distance that determines the X spacing between the bolts. To specify the value using AnchorBoltXRule, do not specify any value for this property. |
The default units are specified in the CustomInterface worksheet of the HS_S3DAssy workbook. Otherwise, specify the units. Example: 25, 25mm, 1in. |
IJUAhsAnchorBoltXRl:: |
Specifies the hgrSupportRule that returns the distance that determines the X spacing between the bolts. The hanger rule must be the name of an existing rule in the catalog. The rule must return value in DB Units (meters). To select the part number using AnchorBoltX, do not specify any value for this property. |
Example: Rule Name: XOffsetByPipeSize |
IJUAhsAnchorBoltXSel:: |
Specifies a codelist value that determines the selection of the anchor bolt. This attribute uses hsSelection codelist value from the HS_S3DAssy_Codelist.xls workbook. |
hsSelection: 1 - By Rule: the software uses the rule to get the value. 2 - By Input: the software uses the value directly. |
IJUAhsAnchorBoltXDef:: |
Specifies the definition of the anchor bolt X spacing and how to measure the anchor bolt X-spacing. If you specify an unsupported definition or if the attribute is left blank, the software displays an error message and the support fails. |
Use the following values: 1 - Edge of the plate to the center of the bolt 2 - Center of the bolt to the center of the bolt 3 - Center of the plate to the center of the bolt |
IJUAhsAnchorBoltY:: |
Specifies the distance that determines the Y spacing between the bolts. To specify the value using AnchorBoltYRule, do not specify any value for this property. |
The default units are specified in the CustomInterface worksheet of the HS_S3DAssy workbook. Otherwise, specify the units. Example: 25, 25mm, 1in. |
IJUAhsAnchorBoltYRl:: |
Specifies the hgrSupportRule that returns the distance that determines the Y spacing between the bolts. The hanger rule must be the name of an existing rule in the catalog. The rule must return value in DB Units (meters). To select the part number using AnchorBoltY, do not specify any value for this property. |
Example: Rule Name: YOffsetByPipeSize |
IJUAhsAnchorBoltYSel:: |
Specifies a codelist value that determines the selection of the anchor bolt. This attribute uses hsSelection codelist value from the HS_S3DAssy_Codelist.xls workbook. |
hsSelection: 1 - By Rule: the software uses the rule to get the value. 2 - By Input: the software uses the value directly. |
IJUAhsAnchorBoltYDef:: |
Specifies the definition of the anchor bolt Y spacing and how to measure the anchor bolt Y-spacing. If you specify an unsupported definition or if the attribute is left blank, the software displays an error message and the support fails. |
Use the following values: 1 - Edge of the plate to the center of the bolt 2 - Center of bolt to the center of the bolt 3 - Center of plate to the center of the bolt |
IJUAhsAnchorBoltZ:: |
Specifies the distance that determines the Y spacing between the bolts. To specify the value using AnchorBoltZRule, do not specify any value for this property. |
The default units are specified in the CustomInterface worksheet of the HS_S3DAssy workbook. Otherwise, specify the units. Example: 25, 25mm, 1in. |
IJUAhsAnchorBoltZRl:: |
Specifies the hgrSupportRule that returns the distance that determines the Z spacing between the bolts. The hanger rule must be the name of an existing rule in the catalog. The rule must return value in DB Units (meters). To select the part number using AnchorBoltZ, do not specify any value for this property. |
Example: Rule Name: ZOffsetByPipeSize |
IJUAhsAnchorBoltZSel:: |
Specifies a codelist value that determines the selection of the anchor bolt. This attribute uses hsSelection codelist value from the HS_S3DAssy_Codelist.xls workbook. |
hsSelection: 1 - By Rule: the software uses the rule to get the value. 2 - By Input: the software uses the value directly. |
IJUAhsAnchorBoltZDef:: AnchorBoltZDefinition |
Specifies the definition of the anchor bolt Z spacing and how to measure the anchor bolt Z-spacing. If you specify an unsupported definition or if the attribute is left blank, the software displays an error message and the support fails. |
Use the following values: 1 - From surface of base plate |