The following attributes define the Combined Shoe data driven assemblies in reference data that are combined to form the Combined Shoe support. For more information on how to use the attributes, see Part Specifications.
|
Attribute Name |
Description |
Implementation Details |
|---|---|---|
|
IJUAhs_ShearLugOffset:: |
Specifies the offset for the shear lug. |
The default units are specified in the CustomInterface worksheet of the HS_S3DAssy workbook, else specify the units. For example, 200, 200mm, 20in, and so on. |
|
IJUAhs_ShearLugOffsetRl:: |
Specifies a hgrSupportRule that returns sheer lug offset value. The hanger rule must exist in the catalog and must be a rule name. |
Rule Name: ShearLugOffsetPipeDia |
|
IJUAhs_ShearLugOffsetDef:: |
Specifies how the offset must be measured and the ShearLugOffset value. |
1 - Offset from Clamp
2 - Offset from Shield
3 - Offset from Shield2
|
|
IJUAhs_ShearLugRot:: ShearLugRotation |
Specifies the number of degrees a sheer lug is rotated around the pipe from the default placement position. |
The default units are specified in the CustomInterface worksheet of the HS_S3DAssy workbook, else specify the units. For example, 100 deg, 100rad. |
|
IJUAhs_ShearLugAngle:: ShearLugAngle |
Specifies the angle between shear lugs. |
The default units are specified in the CustomInterface worksheet of the HS_S3DAssy workbook, else specify the units. For example, 100 deg, 100rad. |
|
IJUAhs_ShearLugRotRl:: ShearLugRotationRule |
Specifies a hgrSupportRule that returns the value for SheerLugRotation. The hanger rule must exist in the catalog and must be a rule name. |
Rule Name: ShearLugRotationBySize |
|
IJUAhs_ShearLugLen:: ShearLugLength |
Specifies the length of the sheer lug. |
The default units are specified in the CustomInterface worksheet of the HS_S3DAssy workbook, else specify the units. For example, 100 mm, 100 in.
|
|
IJUAhs_ShearLugLenRl:: ShearLugLenRule |
Specifies a hgrSupportRule that returns the value for SheerLugLength. The hanger rule must exist in the catalog and must be a rule name. |
Rule Name: ShearLugLengthBySize |
|
IJUAhs_ShearLugLoc:: ShearLugLocation |
Specifies the codelist value that defines where to position the shear lugs. |
1 - Top
2 - Bottom
3 - Both
|
|
IJUAhs_ShearLugPipeLateralLoc::ShearLugPipeLateralLoc |
Specifies the codelist value that defines where to position the shear lugs. |
1 - Behind
2 - Forward
3 - Both
|
|
IJUAhs_ShearLugThk:: ShearLugThk |
Specifies the thickness of shear lug. |
The default units are specified in the CustomInterface worksheet of the HS_S3DAssy workbook, else specify the units. Route Port Plate Part
Shield Part
|
|
IJUAhs_ShearLugThkRl:: ShearLugThkRl |
Specifies a hgrSupportRule that returns the value for SheerLugThk. The hanger rule must exist in the catalog and must be a rule name. |
Rule Name: ShearLugThkBySize |
|
IJUAhs_ShearLugWidth:: ShearLugWidth |
Specifies the width of the shear lug. |
The default units are specified in the CustomInterface worksheet of the HS_S3DAssy workbook, else specify the units. Route Port Plate Part
Shield Part - Not Applicable |
|
IJUAhs_ShearLugWidthRl:: ShearLugWidthRule |
Specifies a hgrSupportRule that returns the value for SheerLugWidth. The hanger rule must exist in the catalog and must be a rule name. |
Rule Name: ShearLugWidthBySize |
