Attribute Name |
Description |
Implementation Details |
---|---|---|
IJUAhsBasePlate1:: BasePlate1Part |
Specifies the part number or part class of the first base plate. To select the part using BasePlate1Rule, do not type any value for this property. |
|
IJUAhsBasePlate1Rl:: BasePlate1Rule |
Defines an HgrSupportRule that returns a part number or part class to use for the base plate. To select the part directly using BasePlate1Part, do not type any value for this property. |
|
IJUAhsBasePlate1Ang:: BasePlate1Angle |
Specifies the angle that BasePlate1 should be rotated about the Z-axis of the port to which the plate is attached. |
|
IJUAhsBasePlate1Off:: BasePlate1Offset |
Specifies the distance by which the base plate should be offset from leg1. BasePlate1Offset is applicable only when StructureConnection is set to either Lapped or Lapped-Opposite. |
|
IJUAhsFrGrout::GroutPart |
Specifies the part number or the part class of the grout part. For example Plate part number. To select the part using GroutRule, do not type any value for this property. |
|
IJUAhsFrGroutRl::GroutRule |
Defines an HgrSupportRule. The hanger rule must exist in the catalog; it can be a rule name or a ProgID. To select the part directly using GroutPart, do not type any value for this property. |
|
IJUAhsFrGroutTh:: GroutThickness |
Specifies the thickness of the GroutPart. |
|
IJUAhsBolt1::Bolt1Part |
Specifies the part number or the part class of the bolts connected to BasePlate1. To select the part using Bolt1Rule, do not type any value for this property. |
|
IJUAhsBolt1Rl::Bolt1Rule |
Defines an HgrSupportRule that returns a part number or the part class to use for the Bolts. To specify the part directly using Bolt1Part, do not type any value for this property. |
|
IJUAhsBolt1Qty::Bolt1Quantity |
Specifies the quantity of bolts to include on BasePlate1. Usually, 2 or 4. The following properties are applicable for all frame types: |
|
IJUAhsBolt1Offset1:: Bolt1Offset1 |
Specifies the offset value for Bolt1Part from the edge of the plate to the center of the bolt along the x-axis of the pipe. |
|
IJUAhsBolt1Offset2:: Bolt1Offset2 |
Specifies the offset value for Bolt1Part from the edge of the plate to the center of the bolt along the y-axis of the pipe. |