Defines the density of the insulation. Type a value or select a material from the list for Insulation Density. When you select a material, the density value replaces the material name.
For ISO-14692 2017, defines the density of the sheath. Type a value for Sheath Density.
-
If you do not specify Insulation Density, then the software uses the default value of Calcium Silicate, as shown in the table.
-
ISO-14692 2017 distinguishes between the reinforced wall thickness and the total wall thickness. The reinforced wall thickness does not include the liner (inside) and sheath (outside) the reinforced wall. In CAESAR II, define the reinforced dimension (not including the liner and sheath) for Diameter and Wt/Sch, and separately define Refract Thk, Refract Density, Liner Thk, and Liner Density.
-
If you specify Sheath Thk but do not specify Sheath Density, then the software uses Pipe Density as the sheath density.
|
Insulation Material |
Density |
|||
|---|---|---|---|---|
|
English |
SI / MM |
Deutsch |
Bar / France /Japan / TUV |
|
|
Amosite Asbestos |
0.9259E-02 |
0.2563E-03 |
0.2563 |
0.2563E+03 |
|
Calcium Silicate |
0.6655E-02 |
0.1842E-03 |
0.1842 |
0.1842E+03 |
|
Careytemp |
0.5787E-02 |
0.1602E-03 |
0.1602 |
0.1602E+03 |
|
Fiberglass (Owen/Corning) |
0.4051E-02 |
0.1121E-03 |
0.1121 |
0.1121E+03 |
|
Foam-Glass/Cellular Glass |
0.4630E-02 |
0.1282E-03 |
0.1282 |
0.1282E+03 |
|
High Temp |
0.1389E-01 |
0.3845E-03 |
0.3845 |
0.3845E+03 |
|
Kaylo 10 (TM) |
0.7234E-02 |
0.2002E-03 |
0.2002 |
0.2002E+03 |
|
Mineral Wool |
0.4919E-02 |
0.1362E-03 |
0.1362 |
0.1362E+03 |
|
Perlite / Celo-Temp 1500 |
0.7523E-02 |
0.2082E-03 |
0.2082 |
0.2082E+03 |
|
Polyurethane |
0.1273E-02 |
0.3524E-04 |
0.3524E-01 |
0.3524E+02 |
|
Styrofoam |
0.1042E-02 |
0.2884E-04 |
0.2884E-01 |
0.2884E+02 |
|
Super X |
0.1447E-01 |
0.4005E-03 |
0.4005 |
0.4005E+03 |