Piping Straight Nozzle - Intergraph Smart 3D - Help - Hexagon PPM

Intergraph Smart 3Dx Property Descriptions

PPMProduct
Intergraph Smart 3D
aSubProduct
3Dx
PPMCategory_custom
Help
Version_SThreeD_Custom
13

Displays the properties for pipe nozzles. A pipe nozzle, or port, defines the connection location between a pipe run and a piece of equipment. The software automatically places a connection part based on the default part listed in the catalog. The part generation depends on the connecting end preparations and the pipe run properties.

The order in which the properties display in your view depends on your configuration.

Approval State

Specifies the status of the selected object or filter. Changing this property sets the Status. The display depends on your access level. You might be unable to change the status of the object. The list is defined by the ApprovalStatus codelist.

Smart 3Dx saves an object to the database when you change that object's status. Use Undo (CTRL + Z) to reverse the status change.

You can only edit or manipulate an object with a status of Working.

Behavior Controlled by User

Specifies whether you can delete the object or not. Select False to prevent anyone from deleting the object from the model.

Construction Requirement

Specifies the construction requirement for the object. To change the options on the list, edit the Construction Requirement select list in Catalog.

Construction Type

Specifies the type of construction for the object. To change the options on the list, edit the Construction Type select list in Catalog.

Correlation Approval Status

Specifies whether the object is approved with discrepancies in the three-dimensional data compared with design basis data. The list is defined by the EFWCorrelationApprovalStatus sheet in the AllCodelist workbook.

Topology mismatch approved

Indicates that the object topology mismatch can be ignored.

Data and Topology mismatches approved

Indicates that the object data and topology mismatches can be ignored.

None

Indicates that you do not approve a mismatch.

Correlation Basis

Specifies whether the object is correlated to a P&ID object. The list is defined by the EFWCorrelationBasis select list.

Correlate Object

Indicates that the object has a correlating object in a P&ID.

No correlation is required

Indicates that the object does not have a correlating object in a P&ID.

Correlation Status

Specifies whether the object has been correlated to an object in a P&ID. The list is defined by the EFWCorrelationStatus select list.

Created by

Specifies the name of the person who created the object.

Date Created

Specifies the creation date of the object.

Date Last Modified

Specifies the date of the last modification to the object.

Distribution Port Status

Specifies the distribution port status for the object. To change the options on the list, edit the Distribution Port Status select list in Catalog.

Distribution Port Type

Specifies the distribution port type for the object. To change the options on the list, edit the Distribution Port Type select list in Catalog.

End Practice

Specifies the end practice for the object. To change the options on the list, edit the End Standard select list in Catalog.

End Standard

Specifies the end standard code for the part port. To change the options on the list, edit the End Standard select list in Catalog.

Fabrication Requirement

Specifies the fabrication requirement for the object. To change the options on the list, edit the Fabrication Type select list in Catalog.

Rule Driven

Specifies that a rule drives the value. This is the default option. Click to switch to User Driven .

User Driven

Allows you to select a value. Click to switch to Rule Driven .

Fabrication Type

Specifies the type of fabrication for the object. To change the options on the list, edit the Fabrication Type select list in Catalog.

Rule Controlled

Specifies that a rule defined for a parent property controls the value. If Rule Controlled does not display, you can select a value.

Flange or Hub Outside Diameter

Specifies the diameter for the flange or hub of the object.

Flange or Hub Outside Diameter CONCEPT

Flange or Hub Thickness

Specifies the thickness of the flange or hub of the object.

Flange or Hub Thickness CONCEPT

Flange or Mechanical Groove Width

Specifies the width of the flange or mechanical groove of the object.

Flange Projection or Socket Offset

Specifies the projection of the flange or offset of the socket for the object.

Flange Projection or Socket Offset CONCEPT

Flow Direction

Specifies the flow direction code for the port. Specifying the correct flow direction code for each part port is very important because the software automatically orients the part to the flow direction of the pipe or port to which the part is connected. To change the options on the list, edit the Flow Direction select list in Catalog.

Hyperlink

Specifies the URL or local file path associated with the object. Click the hyperlink to open the page or object in your default browser. Point to the hyperlink to display the URL or path as a tooltip.

Description

Specifies the descriptive text associated with the hyperlink.

URL

Specifies the web address or local file name associated with the hyperlink. The URL must include the protocol, such as http: or https:, as well as the domain name. For example, https://hexagonppm.com/.

Insulation Criteria

Specifies the insulation criteria for the nozzle.

Up to Neck Only

Indicates that the nozzle is insulated up to the neck, leaving the flange uninsulated

Complete

Indicates that both the nozzle neck and flange are insulated.

The list is defined by the InsulationCriteria codelist.

Insulation Material

Specifies the material of insulation.

Insulation Operating Temperature

Specifies the operating temperature.

Insulation Requirement

Specifies the requirement of the insulation. To change the options on the list, edit the Insulation Purpose select list in Catalog.

Insulation Type

Specifies the type of the insulation. To change the options on the list, edit the Insulation Purpose select list in Catalog.

Insulation Purpose

Specifies the purpose of the insulation. If you selected Not Insulated in the Insulation Specification box, you cannot change the information in the Insulation Purpose box. However, if Insulation Specification is manually defined, you can select the purpose of the insulation in this box. If Insulation Specification is a selected reference data insulation specification, the software reads the purpose from the insulation specification from the reference data and displays it here.

To change the options on the list, edit the Insulation Purpose select list in Catalog.

Insulation Surface Area

Specifies the measurement of the surface area of insulation.

Insulation Thickness

Specifies the thickness of insulation material.

Is Insulated

Specifies whether the object is insulated.

Is Connected

Indicates whether the nozzle is connected.

Last Modified by

Specifies the name of the person who last modified the object.

Liner Thickness at Face of Flange

Specifies the thickness of the flange face for the object.

Liner Thickness at Inside Diameter

Specifies the thickness of the inside diameter of the object.

Name

Specifies the name of the selected object. If the name is too long to entirely display in the box, point to the box to display the complete name as a tool tip. If the name is not defined by a rule, User Defined displays. If this name is generated by a naming rule, Naming Rule displays. If you type a name in this box, Smart 3Dx automatically changes the naming rule to User Defined.

Nominal Size

Specifies the nominal diameter and unit associated with the pipe.

NPD

Specifies the nominal piping diameter for the object. Select a value from the list, or type a value in the text box. If you type an unsupported or invalid value, the box displays a red border and the corresponding error message, listed below.

Current port configuration does not return valid Nominal Size values.

This value is no longer in the list. If you select a different value, you will not be able to return to this value.

NPD Unit Type

Specifies the units for the NPD value. Select mm or in from the list.

Nozzle Length

Specifies the measurement for the nozzle length.

Nozzle Length CONCEPT

Orientation

Specifies the orientation for the object with respect to the local coordinate system. Use the Bearing, Pitch, and Roll properties to change the orientation of the selected object.

Permission Group

Specifies the permission group to which the object belongs. You can select another permission group, if needed. Permission groups are created in Project Management.

Piping Outside Diameter

Specifies the outside diameter of the piping for the nozzle.

Pipe outside diameter CONCEPT

Piping Point Basis

Specifies the piping point basis code that identifies the function of the port. Valid codes are listed in the AllCodeLists.xls workbook on the Piping Point Basis sheet in the Codelist Number column.

Placement Type

Specifies a location type for the nozzle. The following location types are available for nozzles:

S3D_Equipment_Nozzle_Orientation_Radial Radial

Straight nozzle with nozzle centerline on the radial plane.

S3D_Equipment_Nozzle_Orientation_Tangential Tangential

Straight nozzle on the radial plane, but the nozzle centerline does not intersect the vessel axis.

S3D_Equipment_Nozzle_Orientation_Axial Axial

Straight nozzle normal to radial plane.

S3D_Equipment_Nozzle_Orientation_Skew Skew

Straight nozzle that is tilted from both the radial plane and the vessel axis.

Axial Equipment Nozzle Elbow Orientation Axial Elbow

Elbow nozzle with hub centerline normal to the radial plane.

S3D_Equipment_Nozzle_Elbow_Orientation_Radial Radial Elbow

Elbow nozzle placed with the hub radial to the vessel axis.

S3D_Equipment_Nozzle_Elbow_Orientation_OffsetRadial Offset Radial Elbow

Elbow nozzle placed with the hub tangential to the vessel axis.

S3D_Equipment_Nozzle_Orientation_OffsetSkew Offset Skew

Skew nozzle with a parallel offset in the radial plane.

S3D_Equipment_Nozzle_Orientation_PositionByPlaneandAxis Position by Plane and Axis

Places the nozzle at the intersection of the selected plane and axis. Available only for nozzles that have the same shape or design solid as the orientation reference.

S3D_Equipment_Nozzle_Orientation_PositionByPoint Position by Point

Places the nozzle at the location you select with respect to the active coordinate system. Available with all Nozzles including PipePort (No Added Graphic) and HvacPort (No Added Graphic).

N1

Specifies the axial distance from the reference point along the x-axis.

N2

Specifies the distance from the reference object point to the face of the nozzle or port. This is an unsigned offset along the positive direction of the radial.

N3

Specifies the radial distance to the hub centerline. This is an unsigned offset along the positive direction of the radial.

OR1

Specifies the angle around the reference object point measured from the y-axis of the object (y-axis is 0°) or the Y-axis of the coordinate system.

OR1 measured to Active Coordinate System North

Calculates the OR1 angle value with respect to the active coordinate system north. This property is available when the X-axis of the orientation reference is parallel to the Z-axis of the active coordinate system. If a nozzle satisfies this condition, select OR1 measured to Active Coordinate System North and finish the command to save the new value in the session preferences. The next time you select or create a nozzle, the software calculates the OR1 angle value based the last saved preference. Because this is a session preference, this value applies to all of the nozzles in the System Hierarchy Explorer.

Position

Specifies the intersection point of the object to the axis. Use the East, North, and Elevation properties to change the position.

Raised Face or Socket Diameter

Specifies the diameter of the raised face or socket of the nozzle.

Rating Practice

Specifies the rating practice for the nozzle.

Pressure Rating

Specifies the pressure rating code for the part port. Valid codes are listed in the AllCodeLists.xls workbook on the Pressure Rating sheet in the Codelist Number column.

Reinforced Wall Thickness

Specifies the thickness of the reinforced wall of the nozzle.

Reporting Requirement

Specifies the reporting requirement for the object. To change the options on the list, edit the Reporting Type select list in Catalog.

Reporting Type

Specifies the type of reporting. To change the options on the list, edit the Reporting Type select list in Catalog.

Schedule Practice

Specifies the schedule practice short description or code for the part port. To change the options on the list, edit the Schedule Practice select list in Catalog.

Schedule Thickness

Specifies the schedule thickness short description or code for the part port. To change the options on the list, edit the Schedule Thickness select list in Catalog.

Seating or Groove or Socket Depth

Specifies the depth of the seating, groove, or socket of the nozzle.

Seating or Groove or Socket Depth CONCEPT

Suppress Graphics

Specifies whether the graphic representation displays.

Termination Class

Specifies the termination class for the nozzle. The list is defined by the TerminationClass codelist.

Termination Sub Class

Specifies the termination sub-class for the nozzle. The list is defined by the TerminationSubClass codelist.

End Preparation

Specifies the end preparation code for the part port. To change the options on the list, edit the End Preparation select list in Catalog.

Wall Thickness or Groove Setback

Specifies the thickness of the wall or the setback of the groove for the nozzle.