Cableway Properties - Intergraph Smart 3D - Help - Hexagon PPM

Intergraph Smart 3Dx Property Descriptions

Language
English
Product
Intergraph Smart 3D
Subproduct
3Dx
Search by Category
Help
Smart 3D Version
13

Displays properties for cableways. Cableways are logical objects used in the 3D model to reserve space for cable trays and cable. The reserved space also allows interference checking along the route. That is, if any other object is in the same space, a clash results which can be resolved in the modeling phase.

The order in which the properties display in your view depends on your configuration.

Approval State

Specifies the status of the selected object or filter. Changing this property sets the Status. The display depends on your access level. You might be unable to change the status of the object. The list is defined by the ApprovalStatus codelist.

Smart 3Dx saves an object to the database when you change that object's status. Use Undo (CTRL + Z) to reverse the status change.

You can only edit or manipulate an object with a status of Working.

Cableway Type

Specifies the type of cableway.

Cleaning Responsibility

Specifies the party responsible for cleaning the object. To change the options on the list, edit the Cleaning Responsibility select list in Catalog.

Coating Color

Specifies the color of the object coating. To change the options on the list, edit the Coating Color select list in Catalog. Smart 3Dx includes this property in the painting area report.

Rule Controlled

Specifies that a rule defined for a parent property controls the value. If Rule Controlled does not display, you can select a value.Created by

Specifies the name of the person who created the object.

Date Created

Specifies the creation date of the object.

Date Last Modified

Specifies the date of the last modification to the object.

Design Responsibility

Specifies the party responsible for designing the object. To change the options on the list, edit the Design Responsibility select list in Catalog.

Dry Center of Gravity

Specifies the location of the dry center-of-gravity for the object.

Dry Weight

Specifies the dry weight of the object.

Exterior Coating Area

Specifies the area of the coating for the object.

Exterior Coating Requirement

Specifies the coating requirement for the object. To change the options on the list, edit the Coating Type select list in Catalog.

Rule Driven

Specifies that a rule drives the value. This is the default option. Click to switch to User Driven .

User Driven

Allows you to select a value. Click to switch to Rule Driven .

Fabrication Responsibility

Specifies the party responsible for fabricating the object. To change the options on the list, edit the Fabrication Responsibility select list in Catalog.

Fill Efficiency

Specifies the efficiency of the stacking of cables in the cableway. Type a real number, integer, or percent. For example, type 0.9, 90, or 90%.

Hyperlink

Specifies the URL or local file path associated with the object. Click the hyperlink to open the page or object in your default browser. Point to the hyperlink to display the URL or path as a tooltip.

Description

Specifies the descriptive text associated with the hyperlink.

URL

Specifies the web address or local file name associated with the hyperlink. The URL must include the protocol, such as http: or https:, as well as the domain name. For example, https://hexagonppm.com/.

Installation Responsibility

Specifies the party responsible for installing the object. To change the options on the list, edit the Installation Responsibility select list in Catalog.

Interior Coating Area

Specifies the area of the interior coating for the object.

Interior Coating Requirement

Specifies the interior coating requirement for the object. To change the options on the list, edit the Coating Type sheet in the AllCodeLists.xls workbook in the reference data.

Last Modified by

Specifies the name of the person who last modified the object.

Maintenance Depth

Specifies the depth of the maintenance volume. This option is only available when Maintenance Shape is set to Rectangle or Flat Oval

Maintenance Depth Offset

Specifies the depth offset distance. This option is only available when Maintenance Justification is set to User Defined.

Maintenance Justification

Specifies how the maintenance volume (gray box below) aligns with the feature (blue cross section below). There are ten options available: (1) Top Left, (2) Top Center, (3) Top Right, (4) Center Left, (5) Center Center, (6) Center Right, (7) Bottom Left, (8) Bottom Center, (9) Bottom Right, and User Defined.

Maintenance Volume Justification Positions CONCEPT

Maintenance Shape

Specifies the maintenance volume shape: Rectangle, Round, or Flat Oval.

Maintenance Width

Specifies the width of the maintenance volume. This option is only available when Maintenance Shape is set to Rectangle or Flat Oval.

Maintenance Width Offset

Specifies the width offset distance. This option is only available when Maintenance Justification is set to User Defined.

Name

Specifies the name of the selected object. If the name is too long to entirely display in the box, point to the box to display the complete name as a tool tip. If the name is not defined by a rule, User Defined displays. If this name is generated by a naming rule, Naming Rule displays. If you type a name in this box, Smart 3Dx automatically changes the naming rule to User Defined.

Painting Responsibility

Specifies the party responsible for painting the object. To change the options on the list, edit the Painting Responsibility select list in Catalog.

Parent System

Specifies the parent system for the object. Recently used systems that are appropriate to assign as the parent system for this object as well as the Select from Workspace and Select from Model options display in the list. The most recently used system displays at the top.

The parent system of the object must have an Approval Status of Working before you can change the Parent System value. If the Approval Status of the parent system is not set to Working, this value is read-only.

Select Interactively

Turns on or off the interactive selection. When this option is on, you can select the parent object in a graphic view or any of the explorers.

Select from Workspace ICON Select from Workspace

Displays the Select Parent System Dialog with the Workspace tab open. The workspace is the subset of the active model database you specified when you started your design session. Navigate the hierarchy to select the parent system, and then click OK.

Select from Model ICON Select from Model

Displays the Select Parent System Dialog with the Model tab open. The model is all of the objects in the active model database, including those that are not part of your workspace. Navigate the hierarchy to select the parent system, and then click OK.

Requisition Responsibility

Specifies the party responsible for ordering the object. To change the options on the list, edit the Requisition Responsibility select list in Catalog.

Signal Type 1

Specifies the cable usage, which Smart 3Dx uses in tray fill calculations. To change the options on the list, edit the Signal Type select list in Catalog.

Signal Type 2

Specifies the cable usage, which Smart 3Dx uses in tray fill calculations. To change the options on the list, edit the Signal Type select list in Catalog.

Signal Type 3

Specifies the cable usage, which Smart 3Dx uses in tray fill calculations. To change the options on the list, edit the Signal Type select list in Catalog.

Signal Type 4

Specifies the cable usage, which Smart 3Dx uses in tray fill calculations. To change the options on the list, edit the Signal Type select list in Catalog.

Signal Type 5

Specifies the cable usage, which Smart 3Dx uses in tray fill calculations. To change the options on the list, edit the Signal Type select list in Catalog.

Supply Responsibility

Specifies the party responsible for delivering the object. To change the options on the list, edit the Supply Responsibility select list in Catalog.

Testing Responsibility

Specifies the party responsible for testing on the object. To change the options on the list, edit the Testing Responsibility select list in Catalog.

Voltage Grade

Specifies the voltage grade, which Smart 3Dx uses when determining the range of voltage that the cableway can carry. To change the options on the list, edit the Voltage Grade select list in Catalog.

Wet Center of Gravity

Specifies the location of the wet center-of-gravity for the object.