-
Create the curves needed to define the fillet. These curves must be connected and are created with other geometric construction curve interfaces.
-
Click CmdFilletByCurve on the Geometric Construction Palette.
-
Select the first curve.
-
Select the second curve.
-
Select the surface. By default, this is the surface of the plate selected for the main command.
-
Type a radius for the fillet.
-
Select a projection method.
A preview of the projected curves and fillet displays with the first and second curves tangential to and trimmed to the fillet.
-
Click Continue.
Temporary geometry displays in the graphic view and as CmdFilletByCurve in the Geometric Construction Explorer.
-
If needed, create additional geometric constructions.
-
Click Close to return to the main command ribbon.
-
If you stop the command before clicking Finish, the software does not save the geometric constructions to the model. When you restart the command, the following message displays, giving you the option to recover the geometric constructions:
"The previous execution of the command was not completed. Do you want to recover the 3D construction?"
The message displays only during creation of an object and is unavailable when editing an object.
-
The geometric constructions are not saved to the model until you click Finish on the main command ribbon to create the model object.