Place a side plate with sniped corners - Intergraph Smart 3D - Help - Hexagon

Intergraph Smart 3D Molded Forms

Language
English
Product
Intergraph Smart 3D
Subproduct
Molded Forms
Search by Category
Help
Smart 3D Version
13
  1. Click Advanced Plate System Command advanced_plate_systems_i on the vertical toolbar.

  2. Select APS Icon Browser from the Macro Definition list to display the Advanced Plate Palette Dialog.

  3. On the Side Plates tab, click Side Plate 2 to display the Side Plate 2 Ribbon.

  4. In a graphic view, select the coplanar members that support the side plate. Select the members in clockwise or counter-clockwise consecutive order.

    • The first member that you select defines the X-axis for the side plate.

    • The second member that you select defines the Y-axis for the side plate.

      APS_SidePlate_c

  5. Type the required values for Weld Toe, Fillet, Slope Ratio, Cutback, and Cutback 2.

  6. Select the flange location of the side plate from the Side list.

  7. Click Continue.

    A preview of the plate and the geometric constructions used to create the plate displays in the graphic view. The ribbon display returns to the Advanced Plate System Ribbon.

  8. If the plate preview does not display on the correct member flange side, then:

    1. Click Select Supports .

      The ribbon display returns to the Side Plate 2 Ribbon.

    2. Select the opposite location from the Side list, click Accept , and then click Continue.

      A preview of the plate, now on the opposite member flanges, displays in the graphic view. The ribbon display returns to the Advanced Plate System Ribbon.

  9. If needed, click Define Boundaries , and define boundaries for the plate.

  10. Click Finish to create the side plate.

SHARED Tip If the macro does not properly cut through the member cross-sections, type a new distance to extend the trimming planes in the Extension box.