The following advanced opening macros allow you to place circular openings with two supports. The software positions a two-support opening by dimensions from the first and second support, and places the opening with respect to the local coordinate system.
2S Circle RxD Creates a circular opening with two supports. You can define the distance between the opening and the supports, and specify whether the distance is measured from the center or from the edge of the opening. You can also define the radius. |
|
2S Circle 200 Creates a circular opening with two supports. The radius is fixed at 200 mm. |
|
2S Circle 250 Creates a circular opening with two supports. The radius is fixed at 250 mm. |
|
Not available |
2S Circle 300 Creates a circular opening with two supports. The radius is fixed at 300 mm. |