Standard
Name
Specifies the name of the manufacturing member.
Name Rule
Select the naming rule to use to name the manufacturing member. Select User Defined to type a name in the Name box.
Frame System
Specifies the frame system associated with the manufacturing member. This value indicates whether the coordinate system is inherited from the parent object or is set to a coordinate system that has frames in range of the object.
Curvature Type
Specifies the curvature type of the manufacturing object. The ProfileCurvature codelist defines this list.
Is Twisted
Specifies whether the object is twisted or not twisted. The list is defined by the StrMfgIsTwisted codelist.
Detailed Part Status
Specifies the state of the parent part or parts for the manufacturing object. This property only displays when you are modifying a part.
Up to Date
The part state is current with all of its relationships, such as connected parts.
Out of Date
The part state is not current with all of its relationships, such as connected parts. A relationship change can cause this state. You can update the detailed part by using Tools > Recompute Objects.
In Error
The part encountered an error. A relationship change such as connected parts can cause the error. You can clear the error by using View > To Do List.
Warning
The part encountered a warning. A relationship change such as connected parts can cause the warning. You can clear the error by using View > To Do List.
Light Part
The part has not been detailed.
Manufacturing Object Status
Specifies the status of the manufacturing object. This property only displays when you are modifying a manufacturing object.
Up to Date
The part state is current with all of its relationships, such as connected parts.
Out of Date
The part state is not current with all of its relationships, such as detailed parts. A relationship change can cause this state. You can update the manufacturing part by using Manufacturing Service Manager Command .
In To Do List
The part encountered an error or warning. A relationship change such as connected parts can cause this state. You can clear the error by using View > To Do List.
Up to Date (Pre-nesting)
The state of a pre-nested part is current with all of its relationships, such as connected parts.
Out of Date (Pre-nesting)
The state of a pre-nested part is not current with all of its relationships, such as connected parts. A relationship change can cause this state.
In To Do List (Pre-nesting)
The pre-nested part encountered an error. A relationship change can cause this state.
See Pre-nesting.
Dimensions
Length Structural Detail Web
Specifies an approximate length of the detailed web for the detailed manufacturing object.
Length Structural Detail Top Flange
Specifies an approximate length of the top flange for the detailed manufacturing object.
Length Structural Detail Bottom Flange
Specifies an approximate length of the bottom flange for the detailed manufacturing object.
Length Structural Detail Total
Specifies the total length of the detailed manufacturing object.
While there are four different lengths that display on the property page, only Length Structural Detail Total displays the detailing length.
Length Unfolded Web
Specifies the web length of the unfolded manufacturing object.
Length Unfolded Top Flange
Specifies the top flange length of the unfolded manufacturing object.
Length Unfolded Bottom Flange
Specifies the bottom flange length of the unfolded manufacturing object.
Length Unfolded Total
Specifies the total length of the unfolded manufacturing object.
The unfolded length values are the lengths of the extended objects after they are unfolded but before any features are applied. This length has almost no meaning to the designer because the extended length could be arbitrarily long. If the unfolded length is shorter than Length Structural Detail Total, the unfolding process may have been unsuccessful. Because the object is extended as a whole, the summation of the unfolded lengths for the individual faces equal the total unfolded length. Because most stiffeners do not have a bottom flange, the bottom flange unfolded length is typically zero. The same holds for stiffeners that do not have a top flange.
Length Before Features Web
Specifies the web length before features for the manufacturing object.
Length Before Features Top Flange
Specifies the top flange length before features for the manufacturing object.
Length Before Features Bottom Flange
Specifies the bottom flange length before features for the manufacturing object.
Length Before Features Total
Specifies the total length before features for the manufacturing object.
-
The Before Features values display the length that must be cut off the object stock before it can be suitably cut at the ends. This is the length of the object before the end cuts remove material from the profile solid. The software uses the Before Features values to calculate the Material Take-Off (MTO) stock table.
-
The lengths for each of the faces, as well as the total length, are all determined by the end-cuts themselves which internally define length points. This is illustrated with the red dot in the previous figure.
-
The two length points that are farthest apart from each face define the Before Features length for that face. Likewise, the two length points of the whole object that are farthest from each other go to define the Before Features length of the whole object.
Length After Features Web
Specifies the web length after features for the manufacturing object.
Length After Features Top Flange
Specifies the top flange length after features for the manufacturing object.
Length After Features Bottom Flange
Specifies the bottom flange length after features for the manufacturing object.
Length After Features Total
Specifies the total length after features for the manufacturing object.
-
The After Features lengths display the distance between the points of the object that represent the extremity of material. This is computed after the end-cuts remove the material from the stiffener solid.
-
The After Features values determine the final shape of the profile part. In addition, manufacturing and physical connection details (such as shrinkage, margins, feature cuts, marking, bevel angles, part mounts, and so forth) affect the final shape.
Nesting
Export Date
Specifies the export date of the manufacturing object.
Registration Date
Specifies the registration date of the manufacturing object.
Nesting Date
Specifies the nesting date of the manufacturing object.
Lot Number
Specifies the lot number of the manufacturing object.
Part Registered Number
Specifies the part registered number of the manufacturing object.
Order Number
Specifies the order number of the manufacturing object.
Lot Material Type
Specifies the lot material type of the manufacturing object.
Lot Material Grade
Specifies the lot material grade of the manufacturing object.
Lot Length
Specifies the lot length of the manufacturing object.
Lot Width
Specifies the lot width of the manufacturing object.
Lot Thickness
Specifies the lot thickness of the manufacturing object.
Part Type
Specifies the part type of the manufacturing object.
Output Type
Specifies the output type of the manufacturing object.
Output Status
Specifies whether or not the nesting system is up to date. This attribute is not currently used.