Command Reference - Intergraph Smart 3D - Help - Hexagon

Intergraph Smart 3D Structural Manufacturing

Language
English
Product
Intergraph Smart 3D
Subproduct
Structural Manufacturing
Search by Category
Help
Smart 3D Version
13

You can start Structural Manufacturing by clicking Tasks > Structural Manufacturing. Structural Manufacturing has these commands:

Select

Used to select objects in the model.

Marking Command

Adds manual marking lines to detailed parts, such as Block Control, Painting Line, and Robot.

Marking by Definition Command

Creates marking lines based on symbol definition.

Fabrication Margin Command

Adds fabrication margin to detailed parts at plate edges or profile ends. You can place constant value margins as well as oblique margins. These margins extend along the full edge of the plate or at the end of a profile that you select.

Connect Fabrication Margin Command

Selects all of the plates or profiles bounded to the plate system or part, and selects all the faces at the bounding plate systems or parts to place margins.

Margin By Assembly Connections Command

Selects all of the plates or profiles bounded to the plate system or part, or selects al of the plates or profiles bounded to an assembly, and then selects all the faces at the bounding plate systems or parts to place margins.

Regional Margin Command

Adds a margin over regions of an edge. You can create multiple regional margins along a single edge.

Weld Compensation ICON Weld Compensation Command

Adds weld compensation along the entire edge, or regions of an edge. You can create multiple weld compensations along a single edge.

Shrinkage Command

Adds extra material to detailed parts to account for weld shrinkage by scaling either along the edge or by axis.

Multi Shrinkage Command

Stretches multiple manufacturing parts to account for steel shrinkage during welding.

Manufacturing Tab Command

Adds manufacturing tabs to detailed parts at plate edges. You can place tabs of various types.

Plate Template Command and Profile Face Template Command

Creates a set of templates for detailed plate and profile parts at positions that you specify. The command generates the template shapes and template table data.

Tubular Member Template Command

Creates and modifies templates to check the curvature of tube member end cuts.

Edge Template ICON Edge Template Command

Creates and modifies templates to check the curvature of edges.

Pin Jig Command

Creates a set of pin jigs for detailed plate parts or assemblies at defined positions that you specify.

Manufacturing Plate Command

Creates a two-dimensional wireframe representation of a detailed plate that has manual and automated rule-based manufacturing data such as margins, shrinkage, marking lines, beveling, and so on, applied.

Manufacturing Panel Command

Creates a two-dimensional wireframe representation for detailed plate parts combined into a panel to support panel-line production.

Manufacturing Profile Command

Creates a two-dimensional wireframe representation of a detailed profile that has manual and automated rule-based manufacturing data such as margins, shrinkage, marking lines, beveling, and so on, applied.

ManufacturingMemberi Manufacturing Member Command

Creates a two-dimensional wireframe representation of a detailed member that has manual and automated rule-based manufacturing data such as margins, shrinkage, markings lines, beveling, and so on, applied.

Part Monitor Command

Displays the manufacturing part as XML or as graphics interpreted from XML, in order to preview manufacturing data before it is output. The XML is created as the command is executed, but is not saved in the database.

Annotation Editor Command

Moves annotations to avoid overlap, deletes unnecessary annotation, and adds annotations for clarity during production.

Part Editor Command

Edits manufactured parts. You can add markings, contours, and annotations to manufactured parts, and then save those changes to the database.

Manufacturing Service Manager Command

Updates or reviews objects.

New (Block) Assembly

Designs assemblies and assembly blocks and defines properties for their associated building method.

Batch Service Manager Command

Schedules a service manager batch job. This command is available on the right-click menu in the Workspace Explorer for Blocks and Assemblies.

Submit Batch Job Command - Runs batch processes using the Intergraph Batch Services framework. This command is available on the Tools menu.

Custom Processing Command

Runs custom developed (Visual Basic) reporting software. This command is available on the Tools > Manufacturing Services menu.

Stiffeners Diagonal Measurement Command

Provides a tool to extract distance information between two stiffeners or a pin jig for accuracy verification. This tool also provides information on mounting angles. This command is located on the Tools > Manufacturing Services menu.

Select Connected Object Command

Provides a tool to check which objects are connected to a selected object based on physical connections between the parts. This allows you to check if a given manufacturing plate or profile is out of date. This command displays the same list as that shown on the Status tab when you modify a single manufacturing plate or profile. This command is located on the Tools > Manufacturing Services menu.

Macro Editor Command

Provides a tool to view, edit, and overwrite generated macros placed on profile and member parts. The software displays profile and member parts and the macros generated for the parts in a grid. You can edit macro attributes in the property grid, or apply a different macro to a part. You can also reset the definition and attributes of a macro to the rule-selected values. This command is located on the Tools > Manufacturing Services menu.

Copy Structure Command

Provides a tool to generate new plate geometry by copying from an original plate with advanced plate system marks representing the connected structure. This allows you to product the manufacturing data bypassing any problems from the original model data set. This command also provides a tool to generate a surface from plates that can be taken to GAR and repaired before it is used for manufacturing data. This command is located on the Tools > Manufacturing Services menu.

Generate Frame System from Pin Jig Command

Generates a frame system based on pin jig properties. The command creates a coordinate system with the origin at (H0,V0) pin position, and creates frames at the pin rows and columns along the x-axis and y-axis. Along the z-axis, the frames are created at the pin jig base plane, at maximum and minimum pin heights as defined in the catalog. This command is located on the Tools > Manufacturing Services menu.

Export to Nesting Command

Translates the geometry of selected manufacturing data exchange formats and stores this information in a specified file. The manufacturing data is not saved in the Model database. This command is located on the Tools > Manufacturing Export menu.

Managed Export for Smart Production Command

Exports both the DSTV and XML data. This export uses the SmartProductionConfig.xml default configuration file. This command is located on the Tools > Manufacturing Export menu.

Managed Export for DSTV Command

Exports the DSTV data for the selected assembly, and manages the .nc1 files that the software generates. This export uses the DSTVConfig.xml default configuration file. This command is located on the Tools > Manufacturing Export menu.

Managed Export Command

Creates a neutral export. This export does not have an associated configuration file. Instead, it uses the configuration file that you select. This export is intended to be used with custom configuration files. This command is located on the Tools > Manufacturing Export menu.

Check Manufacturability Command

Analyzes parts in the current workspace and reports the objects that will be difficult or impossible to manufacture. This command is available on the Tools menu.