Marking Tab (Template Properties Dialog) - Intergraph Smart 3D - Help - Hexagon

Intergraph Smart 3D Structural Manufacturing

Language
English
Product
Intergraph Smart 3D
Subproduct
Structural Manufacturing
Search by Category
Help
Smart 3D Version
13

When you select multiple objects, you can change the properties that those objects have in common. If the value of the property is the same for the objects that you have selected, that value displays in the ribbon bar. If the values are different, the box for that value is blank. Changing the value of a property will make that the value for all of the selected objects.

User Answers

Selects a template process type from the list. This list is the same as the Process list on the Template ribbon.

Parameter

Displays the parameters for the process that you have selected.

Value

You can modify the parameter values if necessary.

Rule-Based

If the value of the parameter is rule-based, a check box displays. You can clear the check box and then select a different parameter value if necessary.

Catalog Value

Displays the original catalog value for the process if you modified the value.

SideMark

For future use.

SeamMarks

Creates marks at seam locations at both ends of each template.

BaseCtlLineMark

Creates a mark on the top line of the template at some distance from the top base control line.

ShipDirectionMark

Creates a mark indicating the ship direction.

LabelMark

For future use.

FrameMarks

Creates marks of intersecting frames.

KnuckleMarks

Creates marks of intersecting knuckles with the template bottom line.

ReferenceMarks

Creates marks of intersecting reference curves with the template bottom line.

TemplateMarks

Creates marks of intersecting templates with the template.

CustomMarks

Creates any other marks based on rule.

See Also

Plate Template Properties Dialog