-
Switch to the Common task.
-
Click Insert Menu > Control Point Command to display the Control Point Ribbon (Placement).
-
Select the pipe part in the model that needs a note. Use the QuickPick tool to make the correct selection.
-
Position the control point on the centerline of the pipe part. For precision placement, use commands such as Measure
, PinPoint Command
, or Point Along Command.
-
Verify that Control Point is selected in the Type box.
-
Confirm or change the option in the Subtype box on the ribbon.
-
Type a name for the control point in the Name box.
-
Click Properties
to display the Properties Dialog.
-
Click the Notes Tab, and then click New Note.
-
Select the control point to which to attach the note in the Key point box.
-
Type or select a name in the Notes at this location, listed by name box.
-
Select Fabrication from the Purpose of note list so that the note is picked up for inclusion in the drawing.
-
Type the text of the note in the Note text box.
-
Select the Show dimension box if you want a dimension to display on the drawing.
-
Click OK.
-
Switch to the Drawings and Reports task. Use the Update Now Command or Batch > Update Command to update the drawing that includes the pipe part with the associated control point.
The note appears where it was placed in the model.