Displays the options that you use to place a design or planning seam in the model.
Seam by Offset Properties
Opens the Seam Properties Dialog, which you use to view and modify the properties of the seam that you are about to place in the model.
Plate System
Specifies the plate system that you want to place a seam in. You can select multiple plate systems to place multiple seams at the same time. The software uses the same information for each seam. After placement, the seams are unrelated to each other and can be edited as individual entities.
Base Curve
Specifies an existing curve or grid plane from which to offset the seam. The intersection of the grid plane and the plate system defines the base curve.
Offset
Defines the offset parameters and direction from the base curve. See the Offset Curve Definition Controls section below.
Boundaries
Defines the boundaries of the seam. You can define the boundaries by selecting objects, including other seams, in the model. If you select objects in the model and those objects are moved, the software automatically resizes the seam to maintain the boundary relationship. See the Boundary Definition Controls section below.
Finish
Places the seam using the defined parameters.
Reject
Clears all selected objects.
Accept
Accepts all selected objects.
Plate Split Delay
This option is available only when you modify a design seam.
Select this option to delay the split plate update to a more convenient time. The new position and boundaries of the design seam will appear in the graphic view when this option is selected. However, the plate being split is placed on the To Do List with the message Plate System split was stopped due to delay split with a status of Out of Date. You are responsible for going to the To Do List and updating the plate system at a later time. If you do not select this option, the plate is updated as soon as you move the design seam, which can take several minutes to process, but no To Do List item is created for the plate.
Seam Type
Specifies the type of seam to place. Select Design Seam or Planning Seam.
Offset Curve Definition Controls
Unlimited
Defines offset curves without a stop limit.
Stop Limit
Defines offset curves with a stop limit. By using a stop limit, you can select an
edge, profile landing curve, connection reference curve, or seam to control the landing
curves being created. If you type an offset value and the Offset lock is locked, then landing curves are applied at increments of the offset value until
the selected stop limit is reached. If the Offset lock
is unlocked and a value has been defined for Count, then the landing curves equal to the number typed in the Count box are equally spaced between the base curve and the stop limit.
Offset lock
Locks the Offset value, disabling updates of the offset value by mouse moves.
Offset
Specifies the offset distance between the base curve and the landing curve that you are defining. If you type 0, the landing curve is place on the base curve. This box may also display the offset distance as defined by mouse movements.
Method
Specifies an offset method. You can select transverse, longitudinal, vertical, or girth.
Count
Specifies how many seams should be created, each equally spaced by increments of the offset value.
Step
Defines an increment that the system should use as you dynamically move the mouse. If you have typed a value in the Offset box, then this control is not used.
Boundary Definition Controls
Pick Boundaries
Selects objects in the model or in the Workspace Explorer to define the boundaries. This option is only available when you are defining the boundaries.
Solve Ambiguity
If the objects that you selected in the model for the boundary define an ambiguous solution, then the software prompts you to select one bounded section to clarify the needed boundary. This ambiguity only occurs if one of the boundaries wraps around both sides of the profile or seam, such as the hull. Move the cursor over a bounded section, and then click to select.
Boundary List
Opens the Boundary List Dialog. This dialog box allows you to review and define the boundaries.