The monikers are used for all those sheets and the corresponding objects that are processed explicitly by bulkload and for which the "SpecialProcess" flag is set to True in \CatalogData\BulkLoad\Bin\OccurrenceClasses.xml and \ShipCatalogData\BulkLoad\Bin\GSCAD.xml.
OccurrenceClasses.xml
Sheet / Object |
Moniker |
---|---|
MatlThkRange |
MatlThkRange_ThkLow-ThkHigh Example: If ThkLow is 25 and ThkHigh is 55, then: MatlThkRange_0.025-0.055 |
PlateDimensions |
PlateDimension_Thickness Example: If Thickness is 0.0625, then: PlateDimension_0.0625 |
ProfileGroups |
CrossSectionGroup_<GroupId> Example: if GroupId is Group1, then: CrossSectionGroup_ Group1 |
Cables |
For Receptacle: <Receptacle> For Connector: <PartNumber> (ConnectorPartNumber) For BackShell: <PartNumber> (BackShellPartNumber) |
HoleMgmtRules |
<Name> (RuleName) |
NamingRules |
For Class Node: NAMING_RULE <TypeName> Example: If TypeName is CSPGElevationPlane, then: NAMING_RULE CSPGElevationPlane For Naming Rule: <Name><SolverProgID> Example: If Name is DefaultNameRule and SolverProgID is NameRules.CommonNameRule, then: DefaultNameRule NameRules.CommonNameRule |
CrossSectionType |
<Name> (Name of CrossSectionType) |
InsulationSpec |
<SpecName> (Name of the Insulation Specification, for example "Calcium Silicate") |
StructInsulationSpec_Fireproof |
StructInsulationSpec_<SpecName> Example: If SpecName is Conc_1hr, then: StructInsulationSpec_Conc_1hr |
InsulationMaterial |
For Piping: PipingInsulationMaterial_<MaterialType> |
HVACInsulationMaterial |
For Hvac: HvacInsulationMaterial_<MaterialType> |
EquipmentInsulationMaterial |
For Equipment: EqptInsulationMaterial_<MaterialType> |
PipeBendRadii |
< SpecName >, <Npd> <NpdUnitType>, <BendRadiusMultiplier> |
HvacSpec |
<SpecName> |
HvacSpecDefaults |
Default=<SpecName> |
PlateStock |
PlateStock__<PartNumber> |
ProfileStock |
ProfileStock_<PartNumber> |
ProfileClass |
<MaterialType>-<MaterialGrade> |
GeometricConstructionTypes |
<Name> |
GSCAD.xml
Sheet / Object |
Moniker |
---|---|
MoldedFormSpec |
<SpecName> |
MoldedConventions |
MFSpecObj should be there |
MoldedFormNaming |
<ObjectName> |
WCEquipRel |
<ObjectName> |
SmartQuery |
Sheets are removed, and these objects are created only once along with the data. |
RuleQuery |
|
WorkcenterQuery |
|
WorkcenterQuery |
No sheets are available with this name. |