Referencing a cyclone enterprise point cloud - Intergraph Smart 3D - Administration & Configuration

Perform the following procedure to load the Cyclone Enterprise projects into Smart 3D:

1. Click Database > New > Point Cloud Model Reference to open the Point Cloud Model Reference dialog box.

2. Select LeicaGeosystem Inc., and then click Register to open the Point Cloud Properties dialog box.

3. Select CyEnterprise as the model type from the Point Cloud list.

4. Specify a CyEnterprise server name in the Server Name box to establish the connection for the point cloud model type. This is applicable for CyEnterprise projects only.

5. Click Browse in the Point Cloud Source section to browse the point cloud projects on the specified CyEnterprise server.

6. In the Cyclone ENTERPRISE Login dialog, type the Cyclone Enterprise Server Name and Cyclone Enterprise Server Port in the respective boxes.

   This is a one-time configuration step for loading Cyclone Enterprise projects.

7. Select the CyEnterprise model in the Open Cyclone ENTERPRISE Point Cloud dialog, and then click OK to load the selected project into the Point Source Details section of Point Cloud Properties dialog.

   In the Open Cyclone ENTERPRISE Point Cloud dialog, the Coordinates Systems in Point Source list enables you to use the point cloud coordinates systems available on the project. The software reflects the selected coordinate system values in the point cloud model transformation fields on the Point Cloud Properties dialog. The Coordinate Systems in Viewport, Distance Units, and Number of units per meter options are in disabled mode. Hence you cannot use these options while referencing the point cloud models.

8. Optional: Specify the Reference Point and Point Cloud Model Transformation values in the respective boxes provided.

9. Click OK.