-
Click Place Vessel Supports Command on the vertical toolbar.
-
Select the vessel around which to place the supports.
-OR-
Key in the Easting and Northing coordinates of the vessel's center. -
Set Lug Orientation to 45 Degrees.
-
Key in the bolt circle diameter.
-
Select a system, type, section, and cardinal point for the support members. This command only supports the placement of W, M, HP, S, C, MC, BUI, BUC, BUTee, BUIUE, and BUBoxFM sections.
-
Select the four main support members in clockwise order.
-
Click Finish.