The Occurrence tab displays the insulation properties that you can edit or that are automatically determined by the software at placement. The property name appears on the left side of the grid and the corresponding property value appears on the right side of the grid. If you selected more than one insulation, and then selected the Properties command, only the common properties between the selected insulation display.
When viewing properties for a single insulation type, the following properties display. More properties may display depending on what you defined in the reference data. Refer to the Structural Reference Data Overview for more information on properties.
Standard
Name
Displays the name of the insulation. The insulation name is based on the Name Rule selection. If you want to type a new name for the insulation, in the Name Rule box, select User Defined, and then type a name for the insulation in the Name box.
Name Rule
Specifies the naming rule that you want to use to name this insulation.
-
Default Name Rule - Names the insulation using the format: <encasement name>-<location>-<index> where <encasement name> is the insulation specification encasement name, <location> is the global workshare locationID, and <index> is a unique index number that starts at 0001. For example, Column_Contour Encased_All_Fibr-1-0003.
-
Unique Name Rule - Names the insulation using the format: <encasement name>-<location>-<index> where <encasement name> is the insulation specification encasement name, <location> is the global workshare locationID, and <index> is a unique index number that starts at 0001. For example, Column_Contour Encased_All_Fibr-1-0003.
-
Catalog Default Name Rule - Names the insulation using the format: <encasement name>-<location>-<index> where <encasement name> is the insulation specification encasement name, <location> is the global workshare locationID, and <index> is a unique index number that starts at 0001. For example, Column_Contour Encased_All_Fibr-1-0003.
-
User Defined - Select this option to specify the insulation name yourself in the Name box.
System
Selects the system to which the insulation belongs. You can create new systems in the Systems and Specifications task.
By Rule
Displays True if the insulation was placed using an encasement rule. Displays False if the insulation was placed with the user selecting the insulation properties manually.
Surface Area
Specifies the measurement of the surface area of insulation.
Volume
Displays the volume of the insulation.
Reporting Requirements
Specifies whether or not this insulation is reported.
Reporting Type
Selects the reporting requirements code for the insulation. Valid codes are defined in the Catalog task in the Reporting Type select list.
Setback Distance 1
Specifies the distance between the reference 1 location and that end of the fireproofing.
Setback Distance 2
Specifies the distance between the reference 2 location and that end of the fireproofing.
Setback Reference 1
Select the reference point from which to cutback the fireproofing.
-
Part Start - The start of the member part, which takes into account any assembly connection cutbacks or other features which may change member length.
-
Part End - The end of the member part, which takes into account any assembly connection cutbacks or other features which may change member length.
-
Axis Start - The start of the member part's axis, which will remain unaffected by member part features.
-
Axis End - The end of the member part's axis, which will remain unaffected by member part features.
Setback Reference 2
Select the reference point from which to cutback the fireproofing.
-
Part Start - The start of the member part, which takes into account any assembly connection cutbacks or other features which may change member length.
-
Part End - The end of the member part, which takes into account any assembly connection cutbacks or other features which may change member length.
-
Axis Start - The start of the member part's axis, which will remain unaffected by member part features.
-
Axis End - The end of the member part's axis, which will remain unaffected by member part features.
Weight and CG
Displays the center-of-gravity and the weight of the selected object. The center-of-gravity locations are displayed relative to the active coordinate system along the X-, Y-, and Z-axes. The weight value that is displayed in the properties dialog is calculated as the material density multiplied by the object's solid volume. Therefore, the material of the object affects the weight value that is displayed here. Check the material assigned to the object if the weight displayed is an improbable value. For the most accurate weight calculation, use the Tools > Run Reports command.
Dry Weight
Specifies the dry weight of the object.
Wet Weight
Specifies the wet weight of the object.
For equipment, Wet Weight is the sum of Dry Weight and Wet Weight. The Dry Weight and Wet Weight values are catalog properties defined on the part sheet for the equipment.
Dry CG X
Specifies the X-axis location of the dry center-of-gravity.
Dry CG Y
Specifies the Y-axis location of the dry center-of-gravity.
Dry CG Z
Specifies the Z-axis location of the dry center-of-gravity.
Wet CG X
Specifies the X-axis location of the wet center-of-gravity.
Wet CG Y
Specifies the Y-axis location of the wet center-of-gravity.
Wet CG Z
Specifies the Z-axis location of the wet center-of-gravity.
Fabrication and Construction
Fabrication Requirement
Specifies the fabrication requirement for the object. To change the options on the list, edit the Fabrication Type select list in Catalog.
Rule Driven
Specifies that a rule drives the value. This is the default option. Click to switch
to User Driven 
.
User Driven
Allows you to select a value. Click to switch to Rule Driven .
Fabrication Type
Specifies the type of fabrication for the object. To change the options on the list, edit the Fabrication Type select list in Catalog.
Rule Controlled
Specifies that a rule defined for a parent property controls the value. If Rule Controlled does not display, you can select a value.
Construction Requirement
Specifies the construction requirement for the object. To change the options on the list, edit the Construction Requirement select list in Catalog.
Construction Type
Specifies the type of construction for the object. To change the options on the list, edit the Construction Type select list in Catalog.
Surface Treatment and Coating
Exterior Coating Requirement
Specifies the coating requirement for the object. To change the options on the list, edit the Coating Type select list in Catalog.
Rule Driven
Specifies that a rule drives the value. This is the default option. Click to switch
to User Driven .
User Driven
Allows you to select a value. Click to switch to Rule Driven .
Exterior Coating Type
Specifies the type of coating for the object. To change the options on the list, edit the Exterior Coating Type select list in Catalog.
Rule Controlled
Specifies that a rule defined for a parent property controls the value. If Rule Controlled does not display, you can select a value.
Coating Color
Specifies the color of the object coating. To change the options on the list, edit the Coating Color select list in Catalog. Smart 3D includes this property in the painting area report.
Rule Controlled
Specifies that a rule defined for a parent property controls the value. If Rule Controlled does not display, you can select a value.
Exterior Coating Area
Specifies the area of the coating for the object.
Responsibility
Cleaning Responsibility
Specifies the party responsible for cleaning the object. To change the options on the list, edit the Cleaning Responsibility select list in Catalog.
Design Responsibility
Specifies the party responsible for designing the object. To change the options on the list, edit the Design Responsibility select list in Catalog.
Fabrication Responsibility
Specifies the party responsible for fabricating the object. To change the options on the list, edit the Fabrication Responsibility select list in Catalog.
Installation Responsibility
Specifies the party responsible for installing the object. To change the options on the list, edit the Installation Responsibility select list in Catalog.
Painting Responsibility
Specifies the party responsible for painting the object. To change the options on the list, edit the Painting Responsibility select list in Catalog.
Requisition Responsibility
Specifies the party responsible for ordering the object. To change the options on the list, edit the Requisition Responsibility select list in Catalog.
Supply Responsibility
Specifies the party responsible for delivering the object. To change the options on the list, edit the Supply Responsibility select list in Catalog.
Testing Responsibility
Specifies the party responsible for testing on the object. To change the options on the list, edit the Testing Responsibility select list in Catalog.