Wastage Area 3 - Isogen - Reference

Isogen Isometric Drawing Options Reference

Language
English
Product
Isogen
Search by Category
Reference
Smart 3D Version
11 (2016)
Isogen Control Panel Version
2.0(2016)
Isogen Version
13.0(2016)

Controls any additional pipe quantity that needs to be added to the material list to allow for wastage during fabrication.

The property is one of nine that holds a percentage factor that is used to calculate pipe wastage allowances. Each of the nine properties is applicable to a particular model area, which can be identified in the input pipeline data file.

  • 0 uses a percentage multiplication factor of zero. This setting allows you to obtain no increase in pipe material quantity even though a value may have been included in the input pipeline data file.

  • 1 uses a percentage multiplication factor of 1. This value does not increase the basic wastage percentage that can be set in application records in the input pipeline data file. This is the default setting

  • Value uses the specified value as an additional factor that is multiplied by the basic wastage factor (input on appropriate records in the pipeline data input file) to arrive at a final wastage factor percentage. For example, a value of 2 gives a final percentage of twice the value of any figure included in the input pipeline data file.

Defines:

Option Switch - 45
I-Configure - MaterialList.WastageArea3