Controls the number of lines used for output of pipe lengths. Used in conjunction with AText -537.
The form of length output on the material list is controlled by the Linear Quantity Style setting. However, in order to save space, it is possible to have a two line format. By default, Output Lines for Pipe Length is set to 1, which uses the default Linear Quantity Style setting. If AText -537 is being used, then Output Lines for Pipe Length must be set to 2.
AText -537 is used to indicate the new line by using the $ and the setting for the units indication to be output, as shown in the example below:
-537$m |
13.5 m |
m |
|
-537$mm |
13500 mm |
mm |
|
-537$FT |
19.5 Ft |
Ft |
|
-537$FT |
13.5 Ft (instead of 13.5') |
Ft (instead of 13.5') |
Defines:
Option Switch - N/A
I-Configure - MaterialList.UserDefined.SpoolTable.OutputLinesTube
-
Do not use AText -537 if pipe quantities are requested in Ft-Ins (13'-5") units.
-
If set, this AText takes over control of the units indication output on all styles of material list, as well as allowing a new line indicator to force two line output. If it is not set, then normal defaults apply.