Lists the attributes available to all components.
Double-click an attribute name to add it to the Report Layout area. Alternatively, click Add Attribute . Then use the options in the Report Definition panel to configure the report as needed. For more information, see Define the report layout.
Not all of the component attributes listed below are permissible for all report types. As such, the report that is currently active in the Report Definition panel determines which component attributes appear in the attributes list.
Attribute Name |
Description |
Angle |
Value of the angle in hundredths of degrees for elbow, bend, tee, cross, bend-teed, and elbow-teed type components. |
Assembly-ID |
Bolt assembly identifier. |
Auto Generated |
Indicator for whether the software automatically assigns and creates bolt sets. |
Bend-Radius |
Allowable radius of a standard pulled bend. |
Bend-Radius-Multiplier |
NPD multiplier used to define the bend radius. |
Bolt-Dia |
Units of dimensions (in or mm) used for bolt diameter. |
Bolt-Item-Code |
Unique identifier for the bolt component. |
Bolt-Item-Description |
Material description for bolts with the same item code. |
Bolt-Length |
Units of dimensions (in or mm) used for bolt length. |
BOP-Elevation |
Bottom of pipe elevation. Overrides the standard elevation output for tees, crosses, and elbows. |
Characteristic Bore |
Commonly written description of the bore, such as 25x25mm. |
COMPONENT-Attribute1 to |
User-specified component attribute. Up to 100 attributes can be defined and can be used for any purpose. |
Component-Remark- Number |
Associates a text remark with a component. The remark information appears on the material list in two areas: A cross-reference number against the component. In list of remarks output at the bottom of the material list with a cross-reference against each remark. |
Coords-X |
X coordinate. |
Coords-Y |
Y coordinate. |
Coords-Z |
Z coordinate. |
Co-ords-On |
Internal piping object data (POD) file field. |
Cost-Factor |
Explicitly defined value used by Isogen to calculate weld diameter totals. |
Cut-Piece-Length |
Value for the required cut piece length of the pipe or bend. Overrides Isogen's normal cut piece length calculation. |
Dial-Face-Direction |
Direction of face on instrument dials and balloons. |
Equipment Centre |
Coordinate at the X position related to the center or intersection of the component. |
Equipment Centre |
Coordinate at the Y position related to the center or intersection of the component. |
Equipment Centre |
Coordinate at the Z position related to the center or intersection of the component. |
Equipment Non Primary Orientation |
Direction of the equipment. |
Equipment Shape |
Shape of the equipment to be output. |
Equipment Shape 2 |
Shape to be plotted at the exit end of a piece of equipment. |
Equipment Size X |
Size of the rectangular-shaped equipment (cross-section at the X position). |
Equipment Size Y |
Size of the rectangular-shaped equipment (cross-section at the Y position). |
Equipment Size Z |
Size of the rectangular-shaped equipment (cross-section at the Z position). |
External UCI |
System-generated unique component identifier. |
Flange-Left-Loose |
Trigger that indicates the flange is to be left loose for fitting at site. |
Flange-Cut-Minus |
Negative cutting allowance for flange types with SKEYs such as FLRC, FLRE, FLSO, and FOSO. Allowance is used when calculating cut pipe length. |
Flange-Cut-Plus |
Positive cutting allowance for flange types with SKEYs such as FLFL or FLSJ. Allowance is used when calculating cut pipe length. |
Flat-Direction |
Direction of flat side of eccentric reducer. |
FlyText |
Concise summary of the properties for the currently select object. |
Gasket-Class |
Design class for special transition gasket used on fixed length type line pipe. |
Gasket-Rating |
Pressure rating for special transition gasket used on fixed length type line pipe. |
Gearbox |
Gearbox orientation direction. |
Ignored Tube |
Indicator for whether the pipe is ignored. That is, the component is neither considered in the computation of system dimensions nor is it displayed on the isometric drawing. |
Insulation |
Trigger that indicates the component is or is not insulated. |
Insulation Specification |
Insulation specification. Indicates a specification change on the plotted isometric. |
Item Code |
Unique material identifier for the component. |
Item-Description |
Material description for components with the same item code. |
Item-Group |
Component group. |
Length |
Leg length. |
Jacket |
Indicator for whether the component is part of a jacketed system. |
Jacket-Spec |
Jacket specification reference. |
Material-List |
Indicator for how the pipe or component is handled on the material list on the generated drawing (include or exclude). |
Misc-Spec1 to |
Alternative user-defined specification. Indicates a specification change on the plotted isometric. |
Name or Tag |
User-defined identifier for a component. |
Nozzle Coordinates X |
Coordinate at the X position of the nozzle. |
Nozzle Coordinates Y |
Coordinate at the Y position of the nozzle. |
Nozzle Coordinates Z |
Coordinate at the Z position of the nozzle. |
Nozzle Diameter |
Units of dimensions used for the nozzle. |
Nozzle Direction |
Direction of the nozzle. |
Nozzle End Prep |
End preparation for the nozzle. |
Nozzle Non Primary Direction |
Direction of the nozzle. |
Nozzle Position |
Relative position of the nozzle in relation to the equipment. |
Orifice Tap Direction |
Direction of tapping connection on orifice plate. |
Painting Specification |
Painting specification reference. Indicates a specification change on the plotted isometric. |
Part Number |
Alternative part number used by Isogen instead of its automatically generated one. |
Piping Specification |
Primary specification to which the component belongs. |
Plant |
String that identifies a specific area of the plant. |
Plant-Area |
Plant Area identification number. |
Plate-Direction |
Orientation of the penetration plate. |
Plate-Thickness |
Thickness of the penetration plate. |
Port-Reference1 to |
Port reference number for a multi-port component. |
Quantity |
Number of items to be associated. |
Revision |
Pipeline revision at which the component was introduced. |
Rotation-Angle |
Angle of rotation in degrees clockwise. |
Sequence Number |
Internal POD field. |
SHEET |
Sheet number. |
Size1 |
Size of the main pipe. |
Size1 Units |
Units of dimension for the size of the main pipe. |
Size2 |
Size of the branch pipe. |
Size2 Units |
Units of dimension for the size of the branch pipe. |
Size3 |
Size of the tertiary bore. |
Size3 Units |
Units of dimension for the tertiary bore. |
Slip-Plate-Tail- Direction |
Direction of tail on slip plate, slip ring, or spectacle blind. |
Spindle-Direction |
Direction of spindle (operator) on a valve. |
Status |
Trigger to indicate that a component is part of a special status, such as ON HOLD or EXISTING, section on a pipeline. |
Support-Direction |
Direction of user-defined support symbol. |
Suppress-Item-Code |
Indicator for whether the component displays in the material list. |
Tap-Point |
Internal POD field. |
Thickness/Rating |
Attribute in the welding definition file (WDF) to extract the data value from the THICKNESS-RATING attribute on a WELD record. |
Tracing |
Trigger that indicates whether a component is traced. |
Tracing Specification |
Alternative tracing specification. Indicates a specification change on the plotted isometric. |
Unique-Component- Identifier |
Unique database identifier generated by the host system for each component. |
Waste |
Basic wastage factor applied when the software calculates pipe lengths. |
Weight1 / Weight2 |
Weight on fabricated tees and crosses with unequal branch bores. Weight1 is for BRANCH1 pipe, and Weight2 is for BRANCH2 pipe. |
Weld-Attribute1 to |
User-specified weld attribute. Up to 100 attributes can be defined and used for any purpose. |
Weld-Gap |
Space between male welded ends of a welded joint. |
Weld Number |
System-generated number for welds that do not have weld numbers defined in the input data file (PCF or IDF). |
Weld-Remark-Number |
Associates a text remark with a particular weld. The remark information appears on the isometric drawing two areas: A cross-reference number against the weld identifier in the weld box. In a list of remarks that is output at the bottom of the material list with a cross-reference number against each remark. |
Weld-Spec |
Weld specification reference. |
Weld-Type |
Text identifier on a weld, as distinct from the weld SKEY or from implied end type. |
Welding-Allowance |
Denotes from which ends of the pipe have any associated field fit weld (FFW) allowances taken. |
Window-Direction |
Direction of window on sight glass. |