Alternative Texts - Isogen - Reference

Where applicable, each AText description includes its respective default value. If a default value is not specified, the AText is normally left blank.

For each AText, three options are available:

• <Default> uses the default AText value.

• <Suppress> suppresses the AText value.

• <Edit value> modifies the AText value with the user-specified entry.

Pulled Bend Remark

Denotes a pulled bend remark, which is listed under AText -324 (REMARKS HEADING) if a cut pipe length contains a pulled bend. The default value is PLD BEND.

Loose Flange Remark

Denotes a remark which is listed under AText -324 (REMARKS HEADING) if a cut pipe length has a loose flange requirement. The default value is LOOSE FLG.

Field Fit Remark

Denotes the field fit weld remark that is listed under AText -324 (REMARKS HEADING) if a cut pipe length contains a field fit weld. The default value is FFWELD.

Pulled Bend Label

Identifies fabricated bends when listed as separate items on the material list. The default value is FABRICATED (PULLED) BENDS.

Weight Heading

Denotes the column heading for weight. The default value is WEIGHT.

KGS Indicator

Denotes a units indicator for kilogram weights. Used as part of the Weight column heading and in the pipeline weight summary area at the bottom of the material list. The default value is KGS.

LBS Indicator

Denotes a units indicator for pound weights. Used as part of the Weight column heading and in the pipeline weight summary area at the bottom of the material list. The default value is LBS.

Total Weight Label

Denotes identification text for total pipeline weight in the Weight column and in the weight summary area at the bottom of the material list. The default value is TOTAL WEIGHT - THIS DRG.

Erection Weld Label

Identifies special type erection welds. It is used on the material list and on the isometric area as a prefix to the part number. The default value is B.

Fab Weld Label

Identifies special type fabrication welds. It is used in the material list and on the isometric area as a prefix to the part number. The default value is W.

Bolt Unit Subheading

Denotes the bolts sub-heading. Isogen outputs in DIA x LENGTH sequence.

Offshore Material Heading

Denotes the category heading under which components required for OFFSHORE erection are listed. The default value is OFFSHORE MATERIALS.

General Remarks Heading

Denotes the Remarks region heading at the bottom of the material list where remarks text is collectively listed. The default value is REMARKS.

Remark Number Heading

Denotes the Remarks column heading in the material list. Remark reference numbers are listed in this column. The default value is REM.

Welds Sub-Heading

Denotes the group sub-heading under which all welds are listed. The default value is WELDS.

Total Fab Weight Label

Denotes identification text for total fabrication weight in the Weight column and in the weight summary area at the bottom of the material list. The default value is TOTAL FABRICATION WEIGHT.

Total Erect Weight Label

Denotes identification weight for total erection weight in the Weight column and in the weight summary area at the bottom of the material list. The default value is TOTAL ERECTION WEIGHT.

Total Offshore Weight Label

Denotes identification text for total erection weight in the Weight column and in the weight summary area at the bottom of the material list. The default value is TOTAL OFFSHORE WEIGHT.

Total Unlisted Weight Label

Denotes identification text for the total weight of unlisted items in the Weight column and in the weight summary area at the bottom of the material list. The default value is TOTAL WEIGHT UNLISTED ITEMS.

Missing Weight Identifier

Denotes a missing weight indicator. The asterisk character ( * ) is a special marker used on both weight and CoG outputs to indicate that components with zero weight were encountered. The default value is *.

Additional Material - Tangent

Indicates where additional material has been added to a cut piece length to provide a minimum tangent length for a start or finish bend leg. Used in the cut list Remarks column. The default value is TANGENT +.

Additional Material - Cut/Weld

Indicates cut pieces that have additional material added between adjacent bends. Used in the cut piece remarks section. The default value is CUT/WELD.

Accumulated Pipe Indicator

Distinguishes an accumulated pipe sub-total from an individual pipe entry. The default value is TOT.

Jacket Spec Identifier

Indicates that a jacket specification identifier is set in a JACKET-SPEC type record in the pipeline input data file. Appears in the title block. The record content is appended to the AText to form a composite message. The default value is JACKET SPEC.

Shop Test Identifier

Identifies cut pieces that need an additional shop test allowance. Used on the cut list. Applies to welds with SKEY WSST or WFST. The default value is SHOP TEST.