Where applicable, each AText description includes its respective default value. If a default value is not specified, the AText is normally left blank.
For each AText, three options are available:
-
<Default> uses the default AText value.
-
<Suppress> suppresses the AText value.
-
<Edit value> modifies the AText value with the user-specified entry.
ATexts -244 to -249 are used to output directions in conjunction with other ATexts on items that carry a direction setting on the component record in the pipeline input data file. The proper direction as defined by ATexts -244 to -249 is appended to the specific fitting text to make a composite message, such as DIAL FACE WEST.
X Coordinate
Labels the positive X coordinate. The default value is E.
AText ID: |
-201 |
? Value: |
None |
$ Supported: |
No |
Y Coordinate
Labels the positive Y coordinate. The default value is N.
AText ID: |
-202 |
? Value: |
None |
$ Supported: |
No |
-X Coordinate
Labels the negative X coordinate. The default value is W.
AText ID: |
-203 |
? Value: |
None |
$ Supported: |
No |
-Y Coordinate
Labels the negative Y coordinate. The default value is S.
AText ID: |
-204 |
? Value: |
None |
$ Supported: |
No |
Z Coordinate
Labels the positive Z coordinate. The default value is EL+.
AText ID: |
-205 |
? Value: |
None |
$ Supported: |
No |
-Z Coordinate
Labels the negative Z coordinate. The default value is EL-.
AText ID: |
-206 |
? Value: |
None |
$ Supported: |
No |
Degree Symbol
Produces a software-generated degree ( ยบ ) symbol, which is output at all angle indicators requiring a degree symbol (bends, falls, and so on).
AText ID: |
-223 |
? Value: |
None |
$ Supported: |
No |
Primary +Z Label
Appends a primary direction as part of a composite message. The default value is UP.
For more information, see Alternative Texts in Drawing Area.Piping Components.
AText ID: |
-244 |
? Value: |
None |
$ Supported: |
No |
Primary -Z Label
Appends a primary direction as part of a composite message. Used in conjunction with ATexts -243 (PRIMARY FLAT DIRECTION), -278 (DIAL FACE CALLOUT), -280 (TAPPING), -281 (SLIP PAINT CALLOUT), and -282 (SIGHT GLASS CALLOUT). The default value is DOWN.
For more information, see Alternative Texts in Drawing Area.Piping Components.
AText ID: |
-245 |
? Value: |
None |
$ Supported: |
No |
Primary +Y Label
Appends a primary direction as part of a composite message. Used in conjunction with ATexts -243 (PRIMARY FLAT DIRECTION), -278 (DIAL FACE CALLOUT), -280 (TAPPING), -281 (SLIP PAINT CALLOUT), and -282 (SIGHT GLASS CALLOUT). The default value is NORTH.
For more information, see Alternative Texts in Drawing Area.Piping Components.
AText ID: |
-246 |
? Value: |
None |
$ Supported: |
No |
Primary -Y Label
Appends a primary direction as part of a composite message. Used in conjunction with ATexts -243 (PRIMARY FLAT DIRECTION), -278 (DIAL FACE CALLOUT), -280 (TAPPING), -281 (SLIP PAINT CALLOUT), and -282 (SIGHT GLASS CALLOUT). The default value is SOUTH.
For more information, see Alternative Texts in Drawing Area.Piping Components.
AText ID: |
-247 |
? Value: |
None |
$ Supported: |
No |
Primary +X Label
Appends a primary direction as part of a composite message. Used in conjunction with ATexts -243 (PRIMARY FLAT DIRECTION), -278 (DIAL FACE CALLOUT), -280 (TAPPING), -281 (SLIP PAINT CALLOUT), and -282 (SIGHT GLASS CALLOUT). The default value is EAST.
For more information, see Alternative Texts in Drawing Area.Piping Components.
AText ID: |
-248 |
? Value: |
None |
$ Supported: |
No |
Primary -X Label
Appends a primary direction as part of a composite message. Used in conjunction with ATexts -243 (PRIMARY FLAT DIRECTION), -278 (DIAL FACE CALLOUT), -280 (TAPPING), -281 (SLIP PAINT CALLOUT), and -282 (SIGHT GLASS CALLOUT). The default value is WEST.
For more information, see Alternative Texts in Drawing Area.Piping Components.
AText ID: |
-249 |
? Value: |
None |
$ Supported: |
No |
Drawing Label
Used in conjunctions with AText -256 to generate a drawing identifier of the form DRG n OF n in cases where a pipeline is split into multiple isometric drawings. The default value is DRG.
AText ID: |
-255 |
? Value: |
None |
$ Supported: |
No |
Drawing Count Label
Used in conjunctions with AText -256 to generate a drawing identifier of the form DRG n OF n in cases where a pipeline is split into multiple isometric drawings. The default value is OF.
AText ID: |
-256 |
? Value: |
None |
$ Supported: |
No |
Material List Separator
Acts as a separator between the pipeline reference and the spool identifier in the spool isometric drawing identifier.
AText ID: |
-274 |
? Value: |
None |
$ Supported: |
No |
System Reference Label
Indicates the system reference in a printed material list. This has the system reference automatically appended. The default value is SYSTEM REF.
AText ID: |
-336 |
? Value: |
None |
$ Supported: |
No |
View Direction Label
Labels the view direction arrow. The default label for combined, fabrication, erection, and normal spool isometrics is N, while U is the default label for flat spool isometric drawings. If set as blank, the viewpoint direction arrow is suppressed.
AText ID: |
-339 |
? Value: |
None |
$ Supported: |
No |
Edge of Pipe Indicator
Used to indicate edge of pipe dimensions. The default value is EOP.
AText ID: |
-439 |
? Value: |
None |
$ Supported: |
No |
Bottom of Pipe Callout
Used on the isometric drawing in conjunction with bottom of pipe text. The default value is B.O.P.
AText ID: |
-450 |
? Value: |
None |
$ Supported: |
No |
Split Failure Message
Indicates that an unacceptable drawing split point has been found in tube. When used, the message is output in the top left corner of each affected drawing. The default value is UNACCEPTABLE SPLIT.
AText ID: |
-452 |
? Value: |
None |
$ Supported: |
No |
NS Metric Units
Indicates the nominal size for metric bore units. For example, if set to mm, the output is 32mm NS. If set to Blank, the output is 32NS.
AText ID: |
-458 |
? Value: |
None |
$ Supported: |
No |
Cut Out Label
Shows the location of where the material should be removed. The default value is CUT OUT?.
AText ID: |
-477 |
? Value: |
Unknown |
$ Supported: |
Yes |
Unique Part Number Delimiter
Acts as a delimiter between the material list cross-reference identifier and the suffix that is added as a unique component identifier in the style of Identifier (3.1, 3.2, 3.3, as opposed to 3). The default value is the period symbol ( . ).
AText ID: |
-539 |
? Value: |
None |
$ Supported: |
No |
Additional Material Separator
Acts as a separator between part numbers when outputting dual numbers for associated additional material identification on the plotted isometric drawing. The default value is /.
AText ID: |
-545 |
? Value: |
None |
$ Supported: |
No |
I01 Extension Character
Acts as the first character of the drawing output file extension (used in conjunction with Drawing Manager.Drawing File.Use I01 Style). The default value is the pipe character ( | ).
AText ID: |
-546 |
? Value: |
None |
$ Supported: |
No |
Underline Character
Acts as an character. The default value is the underline character ( _ ).
AText ID: |
-547 |
? Value: |
None |
$ Supported: |
No |