Reference a Point Cloud - Intergraph Smart 3D - 2014 - Help

Intergraph Smart 3D Point Cloud

Intergraph Smart 3D
10.1 (2014 R1)

You must load the point cloud vendor software on your computer before referencing it from Project Management.

  1. In the Project Management tree view, right-click the model icon, and then select New Point Cloud Model Reference.

  2. Select the vendor you want to register, and click Register.

  3. In the Open dialog box, select the required point cloud vendor source file, and click Open.

    The selected vendor is registered in the database.

    • If you do not have a CloudWorx project to open, you can cancel the Open dialog box and it opens the Import ModelSpace View for you to import from Cyclone ModelSpace View. Select the required modelspace view and click OK to register the required vendor.

    • You can register multiple point cloud vendors but one at a time. Based on the vendor selection, the appropriate vendor specific dialog boxes are displayed.

    • For CloudWorx, the Select CloudWorx Project/Import Model Space View dialog box is displayed. If you want to reference Leica Geosystems Inc. as the point cloud vendor source, then select the CloudWorx project (.cwprj file) in the Open dialog box. For more information on how to reference a CloudWorx project file, see Open Project section in the CloudWorx User’s Guide.

  4. Click Close to close the Point Cloud Model Reference dialog box.

    You can see the status of the vendor as Registered under the Status column in the Point Cloud Model Reference dialog box. The options Register and Unregister change dynamically based on the vendor status.