Install Database Interference Detection Service - Intergraph Smart 3D - 2014 - Help

Intergraph Smart 3D Point Cloud

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Help
Version_SThreeD_Custom
10.1 (2014 R1)

Prior to installing the Database Interference Detection Service on a computer, verify that all prerequisite software has been installed. If you have an older version of the Database Interference Detection Service installed on your computer, remove it before loading the new software.

You must have administrator privileges on the computer to install the software.

  1. Open Control Panel.

  2. Open Programs and Features.

  3. Select Intergraph Smart 3D from the list of installed software's.

  4. Click Change.

  5. Select Database Interference Detection Service.

  6. Optionally, select 64-bit Services if you want to install the 64-bit version of the interference detection service also.

    If you are running Oracle, you must install the 64-bit Oracle client on the computer running 64-bit interference detection.

  7. Click Update.

If you have not yet installed Smart 3D on the computer, see Install Smart 3D Client Software in the installation guide for detailed instructions.

If you plan to check interferences with a referenced PDS® project, you must install and configure the PDS Data Access component (with all prerequisites) on the IFC database detection server. For more information, see the Plant Design System (PDS) Guide.

See Also

Interactive Interference Checking (Local Detect)
Interference Checking Setup