Member1 Properties - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Hangers and Supports Data Driven Assembly Configuration

Language
English
Product
Intergraph Smart 3D
Subproduct
3D Symbols
Search by Category
Reference Data
Smart 3D Version
12.1 (2019)

These properties specify and customize the main steel member in the support.

The following properties are applicable to U, T, L and I Frame types.

IJUAhsMember1::Member1Part

Specifies the steel part number to use for the main support section. The part number specified must be a rich hanger beam. To select the part number using Member1Rule, do not type any value for this property.

IJUAhsMember1Rl::Member1Rule

Defines an HgrSupportRule that returns a rich hanger beam part number. The hanger rule must exist in the catalog; it can be the name of a rule, or a rule ProgID. To select a part number directly using Member1Part, do not type any value for this property.

IJUAhsMember1Ang::Member1OrientationAngle

Specifies the angle of rotation for the main member. The angle is about the member's axis. The following values are allowed:

IJUAhsMember1BeginOH::Member1BeginOverhangValue

Specifies the distance that the main member should overhang past the first leg. To determine the overhang value using Member1BeginOverhangRule, do not type any value for this property.

IJUAhsMember1BeginOHRl::Member1BeginOverhangRule

Defines an HgrSupportRule that returns the distance that the main member should overhang past the first leg. The hanger rule must exist in the catalog; it can be a rule name or a ProgID. To specify the overhang value directly using Member1BeginOverhangValue, do not type any value for this property.

IJUAhsMember1BeginOHDef::Member1BeginOverhangDefinition

Defines how the BeginOverhang should be measured.

The following values are allowed:

IJUAhsMember1BeginOHSel::Member1BeginOverhangSelection

Uses the hsSelection codelist in the HS_S3DAssy_Codelist.xls workbook to select Member1BeginOverhang by either input or rule. The following values are allowed:

  • By Rule - 1 – Member1BeginOverhangRule is used

  • By Input - 2 – Member1BeginOverhangValue is used

IJUAhsMember1EndOH::Member1EndOverhangValue

Defines the distance that the main section should overhang past the second leg. To specify the overhang value using Member1EndOverhangRule, do not type any value for this property. This property is applicable for U, I and L Frame types.

IJUAhsMember1EndOHRl::Member1EndOverhangRule

Defines an HgrSupportRule that returns the distance that the main section should overhang past the second leg. The hanger rule must exist in the catalog; it can be a rule name or a ProgID. To select the overhang value directly using Member1EndOverhangValue, do not type any value for this property. This property is applicable to U, I and L Frame types only.

IJUAhsMember1EndOHDef::Member1EndOverhangDefinition

Defines how the EndOverhang should be measured. This property is applicable to U, I and L Frame types. The following values are allowed:

For U Frame supports:

For L Frame supports:

For I Frame support:

The following properties are applicable for I, L and U Frame types.

IJUAhsMember1EndOHSel::Member1EndOverhangSelection

Uses the hsSelection codelist in the HS_S3DAssy_Codelist.xls workbook to select the Member1EndOverhang by either input or rule. The following values are allowed:

  • By Rule - 1 – Member1EndOverhangRule is used

  • By Input - 2 – Member1EndOverhangValue is used

IJUAhsCapPlate3::CapPlate3Part

Specifies the part number or the part class of the plate placed at the end of the main section and at the end connected to the first leg. This must be a SmartPart 2 Port Plate. To select the part using CapPlate3Rule, do not type any value for this property.

IJUAhsCapPlate3Rl::CapPlate3Rule

Defines an HgrSupportRule that returns a part number or the part class to use for the cap plate. The hanger rule must exist in the catalog; it can be a rule name or a ProgID. To specify the part directly using CapPlate3Part, do not type any value for this property. CapPlate3Rule can also be used to specify a custom part selection rule. If both CapPlate3Part and CapPlate3Rule are populated, then it is assumed that CapPlate3Rule is a part selection rule, which will then be used to override the default part selection rule defined in the catalog for the part class specified in CapPlate3Part.

IJUAhsCapPlate3Ang::CapPlate3Angle

Specifies the angle that CapPlate3 should be rotated about the Z-axis of the port to which the plate is attached (either BeginFace or EndFace).

IJUAhsCapPlate4::CapPlate4Part

Specifies the part number or the part class of the plate placed at the end of the main section and at the end connected to the first leg. This must be a SmartPart 2 Port Plate. To select the part using CapPlate4Rule, do not type any value for this property.

IJUAhsCapPlate4Rl::CapPlate4Rule

Defines an HgrSupportRule that returns a part number or the part class to use for the cap plate. The hanger rule must exist in the catalog; it can be a rule name or a ProgID. To specify the part directly using CapPlate4Part, do not type any value for this property. CapPlate4Rule can also be used to specify a custom part selection rule. If both CapPlate4Part and CapPlate4Rule are populated, then it is assumed that CapPlate4Rule is a part selection rule, which will then be used to override the default part selection rule defined in the catalog for the part class specified in CapPlate4Part.

IJUAhsCapPlate4Ang::CapPlate4Angle

Specifies the angle that CapPlate4 should be rotated about the Z-axis of the port to which the plate is attached (either BeginFace or EndFace).