Modify a belt component in Sketch 2D - Intergraph Smart 3D - Help

Intergraph Smart 3D Material Handling

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Help
Version_SThreeD_Custom
12.1 (2019)

In this workflow, the belt profile and sketching plane are retrieved from the symbol file so that you can modify the belt component.

  1. Click Place Belt Components Command on the vertical toolbar.

  2. Select a belt profile, either from the Workspace Explorer or from the graphic view, and then click Select Belt Profile as the active option.

  3. Click Modify or Delete Belt Components to display the Review Dialog.

  4. In Select Mode, select Modification.

  5. Select the needed symbol file from the list.

  6. Click OK.

  7. On the ribbon bar, click Sketch2D .

    You can also add intersection and projection items.

  8. Modify the 2D symbol. To place new component(s), see Create belt components.

  9. Click Finish to return to the 3D environment.

  10. In Select Parent, select a system.

  11. In Placement Mode, select:

    • Add, Modify to modify the component.

    • Add, Modify, Delete to delete the component.

  12. In Type of Belt Components, select All.

  13. Click Finish.