Modify Components Relation Command - Intergraph Smart 3D - Help

Intergraph Smart 3D Material Handling

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Help
Version_SThreeD_Custom
12.1 (2019)

Reverses the placement direction relation of the belt components with the head-end or tail-end. Use this command before you modify the belt profile so that the associated belt components do not move when you modify with the belt.

The carry-side components default placement direction relation is TailEnd to HeadEnd. The default placement direction relation for return-side components is HeadEnd to TailEnd. When you reverse the relation, the software measures the distance of the carry-side components from the head-end, and measures the distance of the return-side components from the tail-end.

  • You must select either a carry-side or return-side belt segment, so that the software applies the new relation to all the associated components.

  • After you modify the belt profile, reset the placement direction relation to the default setting, after modifying the belt profile.

  • The placement direction relation of a new component is always default.

Modify Components Relation Ribbon