Set Printing Options - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D 2D Symbols

Language
English
Product
Intergraph Smart 3D
Subproduct
2D Symbols
Search by Category
Reference Data
Smart 3D Version
12 (2018)
  1. On the Main toolbar, click Print .

  2. Do one of the following:

To print

Do this

A selected area of a sheet

Under Print Range, click Print Area and then click OK. A set of crosshairs appears that you can drag to define the area. The Print Area dialog box automatically appears so that you can set options for printing the area.

A range of continuous sheets

In the Sheets box, type a range with a hyphen between the sheet numbers. For example, to print sheets 3 through 7, type 3-7. This prints each sheet on a separate piece of paper.

Non–continuous sheets

In the Sheets box, type the sheet numbers, separated by commas. For example, to print pages 1 and 6, type 1,6.

Selected sheets

In the document, select the sheets you want to print; then, on the Print dialog box, click Selected Sheets. This prints the selected sheets as a composite drawing, like layers on a single sheet of paper. The software uses the scale, paper size, and orientation of the active sheet for printing the final document.

An entire document

Click All Sheets. This is recommended only when all the sheets have the same orientation and paper size.

Multiple copies of the entire document

In the Number of Copies box, type or select a number of copies. To sort the sheets by sheet number, select the Collate Copies check box.

  • When you select several sheets and then click Selected Sheets on the Print dialog box, all the selected sheets are printed as one composite drawing, like layers on top of one another.

  • You can set other options for the printer by clicking Properties or Settings on the Print dialog box. You can set the paper size, source, and orientation.

  • Click File > Sheet Setup to specify the drawing sheet size and scale.

See Also

Print to a File
Print a document
Print Several Documents Simultaneously