-
Generate the drawing for loop 101-F-100.
-
In the Enhanced Report Utility, click tag 101-FT-100.
-
Click Actions > Macro > New.
You can also access this command by clicking New Macro () on the Actions toolbar.
-
On the Macro Properties dialog box, on the General tab, do the following:
-
From the Macro list, select Instrument Manufacturer.
-
In the Caption box, type MFR:
-
Clear the Display 'Null' when no data is available check box.
The dialog box should appear as shown:
-
-
Click the Macro Text tab, and do the following:
-
Click Font to open the Font dialog box.
-
In the Font style field, select Bold.
-
In the Size field, select 12.
-
In the Color field, select Black.
-
-
Click OK to return to the Macro Properties dialog box.
-
Under Alignment, for Vertical select Center and Horizontal, select Left.
-
Click the Caption Text tab, and repeat the steps for the Macro Text except set the color to Red.
The dialog box should appear as shown:
-
Click OK to return to the drawing sheet.
-
On the drawing sheet, click the cross-hair cursor where you want the macro to appear.
-
Click tag 101-FY-100.
-
Click Actions > Macro > New.
-
On the Macro Properties dialog box, on the General tab, do the following:
-
From the Macro list, select Instrument Model.
-
In the Caption box, type MDL:
-
Clear the Display 'Null' when no data is available check box.
-
-
Define the same properties as for manufacturer on the Macro Text and Caption Text tabs.
-
Click OK to return to the drawing sheet.
-
On the drawing sheet, click below the previous macro.
The macros appear on the drawing as shown:
-
Click anywhere on the drawing sheet.
-
On the main toolbar, click Save Custom Changes ().
The Save Custom Changes dialog box opens as shown:
-
Click OK.