-
Click Place Splits Command
on the vertical toolbar.
-
In the Place box, select By Object.
-
In the Split Status box, select Split First.
-
Select the cross brace to split.
-
Click Accept
.
-
Select the other cross brace.
-
Click Finish.
-
Click Place Can Command
to display the Place Can Ribbon.
-
From the Catalog browser or from Can Type on the ribbon, select the in-line can rule to place from the Catalog.
Select one of the Custom Inline Can types to change individual can parameters.
-
Select the cross brace you selected in step 6 (the cross brace that you did not split) near the intersection of the two cross braces.
The software prompts you to select the transverse members.
-
Select the cross brace that you split (the cross brace you selected in step 4).
-
Click Accept
.
-
If you are placing a Custom Inline Can type, change the diameter, thickness, computation method, factor, and cone parameters on the ribbon to meet your needs. If you are placing a predefined can from the Catalog, these settings are read-only.
-
Click Finish.
