Place a fillet surface between two surfaces - Intergraph Smart 3D - Help

Intergraph Smart 3D Molded Forms

Language
English
Product
Intergraph Smart 3D
Subproduct
Molded Forms
Search by Category
Help
Smart 3D Version
11 (2016)
  1. Create the point needed as the tracking point to locate the fillet surface by using Insert > Control Point Command, Insert > Topological Points Command (Insert Menu), or other geometric construction point interfaces, see Points (Geometric Construction Palette Dialog).

  2. On the geometric construction ribbon, click More in the Geometric Construction box.

    The Select Geometric Construction dialog box displays.

  3. Select SurfByFillet and click OK.

  4. Select the first surface.

  5. Select the second surface.

  6. Select the tracking point.

    A preview of the fillet surface displays.

  7. Click Continue.

    Temporary geometry displays in the graphic view and as SurfByFillet in the Geometric Construction Explorer.

  8. If needed, create additional geometric constructions.

  9. Click Close to return to the main command ribbon.

  • If you stop the command before clicking Finish, the software does not save the geometric constructions to the model. When you restart the command, the following message displays, giving you the option to recover the geometric constructions:

    "The previous execution of the command was not completed. Do you want to recover the 3D construction?"

    The message displays only during creation of an object and is unavailable when editing an object.

  • The geometric constructions are not saved to the model until you click Finish on the main command ribbon to create the model object.