End Cut Symbols
For the generic rule set (DBRGenericRuleSet.GenericRuleSet), end cut embedded symbols are located in the [Reference Data Folder]\SharedContent\Drawings\Catalog\Rules\DBRRules\MetaGraphicRules\GenericLandingCurveWithEndCuts\EndCutRules folder. You create symbols in SmartSketch Drawing Editor. See Create a Custom Symbol for Drawings.
The following rules and symbols are used in the Molded Forms Rules embedded symbol rules. Rule selection is based on section types and end cut types defined for the profile part in the Molded Forms task.
Connection |
Section |
Primary Web Cut |
Symbol File |
Symbol |
---|---|---|---|---|
By Rule |
Any |
Any |
ByRule.sym |
|
Welded |
Any |
Any |
Welded.sym |
|
Snip |
Any |
Any |
Snip.sym |
|
Cutback |
Any |
Any |
Cutback.sym |
|
Bracketed |
Any |
Any |
Bracketed.sym |
|
Any |
Any |
Error |
Error.sym |
The following rules and symbols are used in the default Structural Detailing Rules embedded symbol rules. Rule selection is based on section types and end cut types defined for the detailed profile part in the Molded Forms task.
Connection |
Section |
Primary Web Cut |
Symbol File |
Symbol |
---|---|---|---|---|
Any |
Any |
Straight No Offset WebCuts |
StraightNoOffsetWebCuts.sym |
|
Any |
Any |
Straight Offset WebCuts |
StraightOffsetWebCuts.sym |
|
Any |
Any |
Sniped Offset WebCuts |
SnipedOffsetWebCuts.sym |
|
Any |
Any |
Sniped No Offset WebCuts |
SnipedNoOffsetWebCuts.sym |
|
By Rule |
Any |
Any |
ByRule.sym |
|
Welded |
Any |
Any |
Welded.sym |
|
Snip |
Any |
Any |
Snip.sym |
|
Cutback |
Any |
Any |
Cutback.sym |
|
Bracketed |
Any |
Any |
Bracketed.sym |
|
Any |
Any |
Error |
Error.sym |
End Cut Rules
For the generic rule set, Molded Forms Rule.xml and Structural Detailing Rule.xml are also delivered in the [Reference Data Folder]\SharedContent\Drawings\Catalog\Rules\DBRRules\MetaGraphicRules\GenericLandingCurveWithEndCuts\EndCutRules folder.
Your reference data administrator can customize the primary web cut, secondary web cut, top flange cut, and bottom flange cut within a connection type.
<SymbolInfo>
<ProfileInfo>
<!-- Start optional -->
<SectionType>Any</SectionType>
<ConnectionType>Any</ConnectionType>
<PrimaryWebCutInfo>
<First>Web Cut Name</First>
<Top>Any</Top>
<Bottom>Any</Bottom>
</PrimaryWebCutInfo>
<TopFlangeCutInfo>
<First>Any</First>
<Top>Any</Top>
<Bottom>Any</Bottom>
</TopFlangeCutInfo>
<BottomFlangeCutInfo>
<First>Any</First>
<Top>Any</Top>
<Bottom>Any</Bottom>
</BottomFlangeCutInfo>
<SecondaryWebCutInfo>
<First>Any</First>
<Top>Any</Top>
<Bottom>Any</Bottom>
</SecondaryWebCutInfo>
<!-- End optional -->
</ProfileInfo>
<Symbol>WebCutName.sym</Symbol>
</SymbolInfo>