Start Curve Ratio - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Drawings and Reports Reference Data

Language
English
Product
Intergraph Smart 3D
Subproduct
Drawings and Reports
Search by Category
Reference Data
Smart 3D Version
11 (2016)

Specifies the start point on the 2D curve. Specify the value as a ratio along the length of the curve. The ratio must be between 0.0 and 1.0.

The software performs the search for clear space positioning between the start point and the end point. The end curve ratio must be greater than the start curve ratio.

  • The Clear Space Position by 2D Curve (ISDwgPositionByCurve2D) positioning module uses the Start Curve Ratio property.

  • To manually edit the .xml file, enclose the ratio within the following .xml tags.

<startCurveRatio>0</startCurveRatio>