Tolerance Angle for Single Bevel J Weld - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Drawings and Reports Reference Data

Language
English
Product
Intergraph Smart 3D
Subproduct
Drawings and Reports
Search by Category
Reference Data
Smart 3D Version
11 (2016)

Specifies the permissible range of degrees within which the leader line of the label may fall when the arrow line points toward certain welds. Single-bevel butt welds, single-bevel butt welds with broad root faces, and single J butt welds are all affected by this property. In the case of welds of these types, the arrow line points toward the prepared edge of the plate. If the arrow line falls outside of the specified range, then the leader line connecting to the arrow line shifts by 90 degrees minus the value of Tolerance Angle for Single Bevel J Weld.

Specify the range of degrees for the Tolerance Angle for Single Bevel J Weld in the text box. The default range is 0.

  • The Weld (DrawingWeldSymbols) content module uses the Tolerance Angle for Single Bevel J Weld property.

  • The software interprets the Tolerance Angle for Single Bevel J Weld that you specify as paper space units and not as model space units.

  • You must specify a positive decimal value in degrees.

  • To manually edit the .xml file, enclose the range in degrees within the following .xml tags.

<toleranceAngleForSingleBevelJWeld>0
</toleranceAngleForSingleBevelJWeld>