Bolt/Pin Properties - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Hangers and Supports SmartParts Configuration

Language
English
Product
Intergraph Smart 3D
Subproduct
3D Symbols
Search by Category
Reference Data
Smart 3D Version
12 (2018)

These properties define the geometry of the bolts/pins of the beam clamp.

IJUAhsPin1::Pin1Diameter

Specifies the diameter of the bolt/pin. If this is used as a bolt, then bolt diameter should be same as the pin diameter.

IJUAhsPin1::Pin1Length

Specifies the length of bolt/pin. If this is used as a bolt, then bolt length should be same as the pin length.

Pin1Length should be greater than or equal to Length1 of the bottom shape.

IJUAhsHeight3::Height3

Specifies the distance of the pin from the top port of the clip to center of the pin.