Eye Nut Shape - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Hangers and Supports SmartParts Configuration

Language
English
Product
Intergraph Smart 3D
Subproduct
3D Symbols
Search by Category
Reference Data
Smart 3D Version
12 (2018)

IJUAhsSmartShapeType::SmartShapeType

Specifies the classification of the shape. This property uses the codelist number defined in the hsSmartShapeType sheet in the HS_S3DParts_Codelist.xls workbook.

IJUAhsShape1::Shape1Type

Determines the graphic shape used for the nut or washer. Specifies the codelist number in the hsShapeType sheet of the HS_S3DParts_Codelist.xls.

IJUAhsShape1::Shape1Width1

Specifies the width of the oval shape that represents the threaded base of the eye nut.

IJUAhsShape1::Shape1Width2

Specifies the other outside dimension of the nut or washer. This value can be used to create a rectangle shape instead of a square. If this value is zero, negative, or blank, Shape1Width1 is used.

IJUAhsShape1::Shape1Length

Specifies the height of the oval shape that represents the threaded base of the eye nut.

IJUAhsThickness1::Thickness1

Specifies the thickness or outside diameter of the cylindrical stock that is used to form the eye shape.

IJUAhsElongatedEye::InnerWidth1

Specifies the inside width of the eye shape at the oval threaded base.

IJUAhsElongatedEye::InnerWidth2

Specifies the inside width of the eye shape at the InnerLength1 position along the inside of the eye.

IJUAhsElongatedEye::InnerLength1

Specifies the length at the position of InnerWidth2.

IJUAhsElongatedEye::InnerLength2

Specifies the inside of the eye shape.

IJUAhsOverLength1::OverLength1

Specifies the amount that the rod extends past the oval threaded base.

IJUAhsPinDiameter::PinDiameter

Specifies the diameter of the pin. The eye port represents the center of the connecting pin and is located at one half of the PinDiameter value. It can also be an occurrence attribute and is editable on the property page. This value can override the default location of the eye port.