Clamp Properties - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Hangers and Supports SmartParts Configuration

Language
English
Product
Intergraph Smart 3D
Subproduct
3D Symbols
Search by Category
Reference Data
Smart 3D Version
12 (2018)

IJUAhsClampShape::ClampShape

It is the string specifying the name of the clamp. The clamp name is required for the clamp to be drawn. For more information on clamp shape details, see Clamp Shape.

IJUAhsMulti2::Multi2Qty

Specifies the quantity of clamps. Clamps are not shown when Multi2Qty is set to zero.

IJUAhsMulti2::Multi2LocateBy

Specifies the location of the clamps. Individual clamps can be located in two ways.

1 - Relative to Center of the group
2 - Relative to Edge.

The exact meaning depends on the quantity of clamps. This value can be 0 (nothing), 1 (center), or 2 (Edge).

IJUAhsMulti2::Multi2Location

Specifies the distance for exact location of the clamps depending on Multi2LocateBy and Multi2Qty. This value can be either a distance to the edge, or a center-to-center spacing. For more information on multi position details, see Multi Position.

IJUAhsClampOff::ClampOffset1

Offsets the clamp(s) along the x-axis of the pipe.

IJOAhsClampAngle::ClampAngle

Specifies the angle that a clamp body rotates in counter-clockwise when looking along the positive X direction of the pipe port. ClampAngle overrides Angle3 in the Clamp Shape.

IJUAhsClampWidth1::ClampWidth1

Specifies the width of the lower side of the Clamp.

IJUAhsClampWidth2::ClampWidth2

Specifies the width of the upper side of the Clamp.

IJUAhsClampWidthSel::ClampWidthSel

Specifies the codelist value for the length of the Clamp.

The following values are supported:

1 = Auto - length is based on the length of the Shoe
2 = Input - length is based on the input from the occurrence.

IJUAhsClampLenOvrHng::ClampLenOvrHng

Specifies the overhang for the Shoe length. If the codelist value of IJUAhsClampWidthSel::ClampWidthSel is 1, then the length is based on the length of the Shoe. You can specify overhang and the IJUAhsClampLenOvrHng::ClampLenOvrHng attribute controls the overhang.

IJUAhsClampDiameter1::ClampDiameter1

Specifies the diameter of the Clamp.

IJUAhsClampBoltOff1::ClampBoltOffset1

Specifies the offset for Bolt1 from the center of the Shoe.

IJUAhsClampBoltOff2::ClampBoltOffset2

Specifies the offset for Bolt2 from the center of the Shoe.

IJUAhsClampBoltOff3::ClampBoltOffset3

Specifies the offset for Bolt3 from the center of the Shoe.

IJUAhsClampBoltOff4::ClampBoltOffset4

Specifies the offset for Bolt4 from the center of the Shoe.

IJUAhsClampBoltOff5::ClampBoltOffset5

Specifies the offset for Bolt5 from the center of the Shoe.

IJUAhsClampBoltOff6::ClampBoltOffset6

Specifies the offset for Bolt6 from the center of the Shoe.

IJUAhsClampDiameter4::ClampDiameter4

Specifies the diameter of the Clamp including the liner.

IJUAhsClampWidth4::ClampWidth4

Specifies the length of the liner.