Output Type - CAESAR II - Help

CAESAR II Users Guide

Language
Русский
Product
CAESAR II
Search by Category
Help
CAESAR II Version
12

Designates the type of results available for load cases that have a Keep status. Use this field to help minimize clutter on the output and to ensure that only meaningful results are retained. The available options are:

Disp/Force/Stress

Provides displacements, restraint loads, global and local forces, and stresses. This is a good choice for operating cases where you are designing to a code which does a code check on operating stresses, because the load case is of interest for interference checking (displacements) and restraint loads at one operating extreme (forces).

Disp/Force

Provides displacements restraint loads, global and local forces. This is a good choice for OPE cases where you are designing for those codes which do not do a code check on OPE stresses.

Disp/Stress

Provides displacements and stresses only.

Force/Stress

Provides restraint loads, global and local forces, and stresses. This is a good choice for the Sustained (cold) case, because the load case would be of interest for restraint loads at one operating extreme (forces), and code compliance (stresses). FR combination loads cases developed under previous versions of CAESAR II are converted with this force/stress type.

Disp

Provides displacements only.

Force

Provides restraint loads, global, and local forces only.

Stress

Provides stresses only. This is a good choice for a sustained plus occasional load case (with Abs combination method), because this is an artificial construct used for code stress checking purposes. ST combination load cases developed under previous versions of CAESAR II are converted with this stress type.