Landing Curve Table Dialog - Intergraph Smart 3D - Help

Intergraph Smart 3D Molded Forms

Language
English
Product
Intergraph Smart 3D
Subproduct
Molded Forms
Search by Category
Help
Smart 3D Version
12.1 (2019)

Specifies a landing curve by defining X, Y, and Z coordinates of points along the landing curve. Each point along the landing curve is defined on a single row in the table. You must define two out of the three coordinates. The software derives the third coordinate for you and highlights the derived coordinate in blue.

Dialog Controls

Point Type

Select an option for each point:

Definition

The point on the row is used to define the landing curve, and the curve transitions smoothly through the point.

Knuckle

The point on the row is used to define the landing curve, and the curve knuckles at the point.

Display

The point is computed based on the intersection of the landing curve and another object, as defined by Derived Points in the Table. Display points are not definition points and are not saved as part of the landing curve definition.

Intersecting Object

Select a seam or profile stiffener on the selected plate system, or another plate system that is bounded or split by the selected plate system.

If Intersecting Object is not selected, then two of the X, Y, and Z coordinates must have values. The third coordinate is derived.

If Intersecting Object is selected, then one of the X, Y, and Z coordinates must have a value. The other two coordinates are derived.

X Reference

Select a frame (Y-Z) grid plane to specify the X-coordinate of the landing curve point. You can also explicitly specify the X coordinate by typing the point's location along the X-axis.

X Offset

Type an offset value from the X reference.

Y Reference

Select a buttock (X-Z) grid plane to specify the Y-coordinate of the landing curve point. You can also explicitly specify the Y coordinate by typing the point's location along the Y-axis.

Y Offset

Type an offset value from the Y reference.

Z Reference

Select a waterline (X-Y) grid plane to specify the Z-coordinate of the landing curve point. You can also explicitly specify the Z coordinate by typing the point's location along the Z-axis.

Z Offset

Type an offset value from the Z reference.

  • Points for which you typed coordinates are usually definition points.

  • Knuckle points cannot be at the ends of a landing curve.

  • Every curve must have a minimum of two definition points.

Curvature Vector

Display Method

Specifies how you want the curvature vectors to appear when you click Preview. Select Number of vectors to specify a fixed number of vectors that the software is to distribute evenly along the landing curve. Specify the number of vectors in the Count box. Select Vector spacing to place vectors along the landing curve a fixed distance apart. The software determines the number of vectors based on the landing curve length and the spacing distance specified in the Spacing box.

Count

Specifies the number of vectors to distribute evenly along the landing curve preview. This option is only available when Display Method is set to Number of vectors.

Spacing

Specifies the distance between vectors along the landing curve preview. This option is only available when Display Method is set to Vector Spacing.

Range

Select where along the landing curve preview you want to see curvature vectors. Select Entire Curve to display curvature vectors along the entire landing curve. Select Between Definition Points to display curvature vectors only between definition points.

Scale Factor

Specify a scaling factor value for the curvature vectors. The larger the value the larger the curvature vectors appear in the graphic view.

Intersection Plane

This option is available only when the coordinates of two points are known for a landing curve on a plate system with curvature (such as the hull). When the coordinates of only two points are known, multiple solutions exist to define the landing curve. You can define an intersection plane passing through the points to complete the landing curve definition.

Base Plane

Specifies the plane in which to measure the angle used to define the intersection plane.

From

Specifies the plane from which to measure the angle used to define the intersection plane. Select Horizontal or Vertical.

Angle

Specifies the angle of the intersection plane, measured from the Horizontal or Vertical plane. Use the unit of measure selected in Tools > Options.

Normal to Base Plane

Select to orient the intersection plane normal to the base plane. The intersection plane appears as a straight line when viewed in the direction of the Base Plane. Clear to orient the intersection plane by the minimum linear distance between the two points as allowed by the specified Angle.

  • Base Plane is similar to the angle Plane in Profile Orientation Definition.

  • From plane is similar to the Reference plane in Profile Orientation Definition.

  • Angle is similar to the Angle in Profile Orientation Definition.

  • You can create a profile with a planar web if the Angle for the landing curve is the same as the Angle for the profile orientation.

In the following example, A is the Base Plane, B is the From Horizontal plane, C is the Angle, D is the final Intersection Plane, and E is the landing curve on the selected plate system.

Derived Points in the Table

These options control when and how the software derives points between definition points that you define. Derived points are not saved as part of the landing curve definition.

X: Transverse

Select this option to have the software derive points where the landing curve intersects each X grid plane. You must select a coordinate system.

Y: Buttock

Select this option to have the software derive points where the landing curve intersects each Y grid plane. You must select a coordinate system.

Z: Waterline

Select this option to have the software derive points where the landing curve intersects each Z grid plane. You must select a coordinate system.

Seams

Select this option to have the software derive points at the intersection of the landing curve with seams on the selected plate system.

Stiffeners

Select this option to have the software derive points at the intersection of the landing curve with stiffeners on the selected plate system.

Plates

Select this option to have the software derive points at the intersection of the landing curve with other plate systems bounded or split by the selected plate system.

Preview

Displays the landing curve, as currently defined by the points in the table, in the model. You can select Preview multiple times to see changes made to the landing curve as you add and edit points in the table.

Print

Prints a copy of the landing curve table, as it is currently defined.

Right-Click Menu Commands

There are several right-click commands available to help in defining the points in the table.

Cut Cell

Removes the contents of the selected cell and moves the contents to the Clipboard.

Copy Cell

Moves a copy of the selected cell contents to the Clipboard.

Paste Cell

Places a copy of the Clipboard contents in the cell.

Cut Row

Removes the contents of the selected row and moves the contents to the Clipboard.

Copy Row

Moves a copy of the selected row contents to the Clipboard.

Paste Row

Places a copy of the Clipboard contents in the row, replacing any existing values in the row.

Paste Reverse

If more than one row is copied, this command places a copy of the Clipboard contents in the same number of rows but in reverse order, replacing any existing values in the rows.

Insert Cut/Copied Rows

Inserts the row on the Clipboard into a new row in the table.

Insert Reverse Rows

If more than one row is copied, this command inserts the rows from the Clipboard in the table in reverse order.

Delete

Removes the contents of the selected cell.

Insert Row

Inserts a new, blank row into the table above the selected row.

Remove Row

Removes the selected row from the table.

Make Derived

Marks the selected reference as the one you want the software to derive.

What do you want to do?